Going to be doing a la318 swap into my 62 d100. Anybody know if the my old slant 6 throttle lever underhood will work on the 318? Also anybody have a 318 3 core radiator and shroud they want to sell? Or what suppliers radiator will work without hacking up core support? Thanks.
Brandon
Carb linkage-slant6 to la318 swap
-
- Sweptline.ORG Member
- Posts: 67
- Joined: Tue Jul 14, 2015 2:58 pm
- City: Eakly
- State: OK
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3013
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: Carb linkage-slant6 to la318 swap
Part that goes through the firewall should be the same as v8. Part to carb. Nope.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
Re: Carb linkage-slant6 to la318 swap
As Kim says. Plus, if your truck has an automatic
tranny, the kick-down linkage is different as well.
John
tranny, the kick-down linkage is different as well.
John
-
- Sweptline.ORG Member
- Posts: 67
- Joined: Tue Jul 14, 2015 2:58 pm
- City: Eakly
- State: OK
Re: Carb linkage-slant6 to la318 swap
Thanks for the info guys. Yes the throttle rod is what I was wondering about-part to carb. My truck was a 3 on the tree also. Anybody have any throttle rods for a la318. 3 core radiator & shroud? Thanks
Brandon
Brandon
Re: Carb linkage-slant6 to la318 swap
I have the rod from my 64 318 truck. I just switched to a cable style throttle when I went to 4 bbl. This should work for your truck. Send me a pm if you are interested.
Barnaby
Barnaby