Bell housing insulators

Engine, transmission, rear-end, driveline, fuel system etc..
Post Reply
Mopartrucks
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 3
Joined: Sun Nov 29, 2015 9:05 pm
City: Bruning
State: NE

Bell housing insulators

Post by Mopartrucks »

Hello, I did some checking on older threads about the insulators for the older manual transmissions. Is there anything new out there besides the imperial services insulators? Also what about a good quality engine mount insulator? My truck is a 67 383 4 spd. Thanks so much for any help!

User avatar
Hobcobble
Forum Moderator
Forum Moderator
Posts: 14573
Joined: Wed Dec 31, 1969 6:00 pm
Location: Lockport, NY

Re: Bell housing insulators

Post by Hobcobble »

Mopartrucks wrote:Hello, I did some checking on older threads about the insulators for the older manual transmissions. Is there anything new out there besides the imperial services insulators? Also what about a good quality engine mount insulator? My truck is a 67 383 4 spd. Thanks so much for any help!
Welcome to the site. :welcome :usa You can still get insulators for your engine mounts
from NAPA or other parts stores. On the bell housing insulators, you're pretty much
limited to Imperial for new ones. You can post up an ad in the Parts Wanted section
to see if anyone can help you out on a decent pair of used ones. :idea :2cents
John

Post Reply