Three on the tree to 5 speed?
-
- Sweptline.ORG Member
- Posts: 25
- Joined: Fri Aug 21, 2015 7:19 pm
- City: 19067
- State: PA
Three on the tree to 5 speed?
I've got a 68d100 with a three in tree behind a 318. I want to swap the 3 speed for a 5 speed. Anyone know what transmission would pair up nicely with the 318? Any help would be great. Thanks
- PowerMan
- Sweptline.ORG Pioneer
- Posts: 1186
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Auburn
- State: CA
- Location: Auburn, CA
Re: Three on the tree to 5 speed?
Nv3500 from a 90's Dodge 1500. I have done an Nv4500 swap behind my LA 340 but the Nv3500 is cheaper and more commonly found in a wrecking yard. Both transmissions are 5 speed with overdrive.
1962 W100 - NV4500- LU2 winch Looking for a 4BT!
1965 W200 CC 12 Valve P-Pump, HX35/S475, 5x12s, pushrods, 60# springs, 55 DVs, NV4500
1965 D100-> W100 Town Wagon 225 Slant - NP435
1965 W200 CC 12 Valve P-Pump, HX35/S475, 5x12s, pushrods, 60# springs, 55 DVs, NV4500
1965 D100-> W100 Town Wagon 225 Slant - NP435
-
- Sweptline.ORG Pioneer
- Posts: 4037
- Joined: Fri Feb 15, 2008 8:46 pm
- City: Wichita Falls
- State: TX
- Location: wichita falls,texas
Re: Three on the tree to 5 speed?
Powerman, would the NV3500 bolt up to his hydraulic bell?
Bucky
Bucky
1966 W500
1975 W600
1978 W200 club cab
1975 W600
1978 W200 club cab
- PowerMan
- Sweptline.ORG Pioneer
- Posts: 1186
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Auburn
- State: CA
- Location: Auburn, CA
Re: Three on the tree to 5 speed?
The nv3500 has an integral bellhousing so it does not need the bellhousing. It is a light duty trans for the Dodge Dakota and 1500s. It would require removal of the current bellhousing and crossmember with fabrication of a new crossmember for mounting at the rear of the transmission.
1962 W100 - NV4500- LU2 winch Looking for a 4BT!
1965 W200 CC 12 Valve P-Pump, HX35/S475, 5x12s, pushrods, 60# springs, 55 DVs, NV4500
1965 D100-> W100 Town Wagon 225 Slant - NP435
1965 W200 CC 12 Valve P-Pump, HX35/S475, 5x12s, pushrods, 60# springs, 55 DVs, NV4500
1965 D100-> W100 Town Wagon 225 Slant - NP435
-
- Sweptline.ORG Pioneer
- Posts: 4037
- Joined: Fri Feb 15, 2008 8:46 pm
- City: Wichita Falls
- State: TX
- Location: wichita falls,texas
Re: Three on the tree to 5 speed?
Thanks! I did not know that.
Do the 4500 & other "modern" 5 speeds also have integral bellhousings?
The NP540 is the 5 speed that Dodge offered back in the 60's/70's, but the OP wouldn't gain anything but more low gears.
Bucky
Do the 4500 & other "modern" 5 speeds also have integral bellhousings?
The NP540 is the 5 speed that Dodge offered back in the 60's/70's, but the OP wouldn't gain anything but more low gears.
Bucky
1966 W500
1975 W600
1978 W200 club cab
1975 W600
1978 W200 club cab
Re: Three on the tree to 5 speed?
This works... viewtopic.php?f=3&t=23712&start=20
I sold all of my sweptline trucks,except the invisible one. I just couldn't stand to see it go!
( )
91w350 CTD
93w250 CTD
( )
91w350 CTD
93w250 CTD
-
- Sweptline.ORG Member
- Posts: 25
- Joined: Fri Aug 21, 2015 7:19 pm
- City: 19067
- State: PA
Re: Three on the tree to 5 speed?
So what would I do about a clutch pedal assembly. Would the Dakota one work on my truck? Or will I have to go aftermarket?
Re: Three on the tree to 5 speed?
PunisherD100 wrote:So what would I do about a clutch pedal assembly. Would the Dakota one work on my truck? Or will I have to go aftermarket?
The NV3500 has a hydraulic actuated clutch, just use the existing pedal/master from your truck and adapt the line to the slave for the NV3500. Another interesting option that I have considered is the Getrag 236 six speed used after 2005. I found one locally but don't currently have the cash to pull the trigger.
'63 D100
Build Link: viewtopic.php?f=34&t=40000
Build Link: viewtopic.php?f=34&t=40000
-
- Sweptline.ORG Member
- Posts: 25
- Joined: Fri Aug 21, 2015 7:19 pm
- City: 19067
- State: PA
Re: Three on the tree to 5 speed?
Does it matter if the nv3500 is from a 6 cylinder Dakota or a v8? I've located one from a 95' with a 6 cylinder
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3016
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: Three on the tree to 5 speed?
PunisherD100 wrote:Does it matter if the nv3500 is from a 6 cylinder Dakota or a v8? I've located one from a 95' with a 6 cylinder
Nope. 3.9 /5.2/5.9 all have same bolt pattern on back of block.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
-
- Sweptline.ORG Member
- Posts: 25
- Joined: Fri Aug 21, 2015 7:19 pm
- City: 19067
- State: PA
Re: Three on the tree to 5 speed?
Thanks everyone for your help
-
- Sweptline.ORG Member
- Posts: 25
- Joined: Fri Aug 21, 2015 7:19 pm
- City: 19067
- State: PA
Re: Three on the tree to 5 speed?
Ok so I found a 98' Dakota on Craigslist with a five speed. Guy says the glove box sticker reads DDQ Aisin five speed. After doing some research it seems as though the nv3500 would read DDC. Anyone know if this is correct?
Re: Three on the tree to 5 speed?
PunisherD100 wrote:Ok so I found a 98' Dakota on Craigslist with a five speed. Guy says the glove box sticker reads DDQ Aisin five speed. After doing some research it seems as though the nv3500 would read DDC. Anyone know if this is correct?
Aisin AX15, According to the parts manuals it was available pre-1999 in Dakotas. There were 3 transmissions available that time frame:
DDK = NV1500 5 Speed Manual
DDQ = Aisin 5 Speed Manual (AX15)
DDC = NV3500 5 Speed Manual
The 4WD version of the AX15 holds up decently in Jeeps with swapped in SBC's, it wouldn't necessarily be a bad choice.
The Jeep/Dodge AX15 5-speed, the Jeep NV3550 5-speed, the Jeep NV1500, the Toyota R150F, R151F & R155F, the 87-92 Toyota Supra Turbo R154, the Isuzu AR5 and the Pontiac Solstice\Saturn Sky\Chevy Colorado\ GMC Canyon MA5 5-speeds all share the same case to bellhousing bolt pattern (Large Pattern)
The input shaft lengths vary with application but some swapping can be accomplished.
Here is some 'family' info:
AX5 = 7.5"
AX15 = 7.875"
Pre 1995 R150\R151 = 6.5"
1996 up Toyota R series = 7.5"
87-92 Turbo Supra R154 = 7.25"
Toyota W series = 6.5"
Toyota G series = 6.5"
AR5 = 8.2"
MA5 = 8.2"
NV3550 = 7.875"
NV1500 = 8.6"
More info from Novak Adapters: https://www.novak-adapt.com/knowledge/t ... nual/ax15/
'63 D100
Build Link: viewtopic.php?f=34&t=40000
Build Link: viewtopic.php?f=34&t=40000