shiftter bushing part number

Engine, transmission, rear-end, driveline, fuel system etc..
Post Reply
shopguy
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 81
Joined: Sat Dec 25, 2010 9:28 am
City: Central
State: NJ
Location: Central NJ

shiftter bushing part number

Post by shopguy » Mon Jan 18, 2016 11:13 am

"Anyone have a source or part number handy for the rubber shift bushings on the gear box arms??? 65 3 spd. manual trans.
Mine are ......gone.......!

shopguy
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 81
Joined: Sat Dec 25, 2010 9:28 am
City: Central
State: NJ
Location: Central NJ

Re: shiftter bushing part number

Post by shopguy » Tue Jan 26, 2016 9:36 pm

I contacted Passon and Brewers. the bushing is NOT available.... I'll figure something out! no worries. I'll post what I come up with in case anyone else needs the fix.

UPDATE!!! I was able to source several bushings that will work! Slightly different shape....but works great!

shopguy
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 81
Joined: Sat Dec 25, 2010 9:28 am
City: Central
State: NJ
Location: Central NJ

Re: shiftter bushing part number

Post by shopguy » Wed Jan 27, 2016 8:44 pm

here are some picts of the old bushing and location. Its a 65 225/3spd column shifter. I also show the new bushings that I found.
It was really really sloppy........

I have a bunch of them if anyone is needing them.....PM me.....
$6.50 for 2 including mailing.....
Attachments
20160126_164640_resized.jpg
replacement bushings
20160126_164640_resized.jpg (37.7 KiB) Viewed 312 times
20160126_131619_resized.jpg
shift arms for the 3 spd
20160126_131619_resized.jpg (27.93 KiB) Viewed 312 times
20160127_084313_resized.jpg
old beat up bushings
20160127_084313_resized.jpg (28.5 KiB) Viewed 312 times

shopguy
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 81
Joined: Sat Dec 25, 2010 9:28 am
City: Central
State: NJ
Location: Central NJ

Re: shiftter bushing part number

Post by shopguy » Wed Nov 15, 2017 1:21 pm

Still have the bushings..........if anyone needs them! Mike

Post Reply