D400 gearing

Engine, transmission, rear-end, driveline, fuel system etc..
Post Reply
jkeckley
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 6
Joined: Mon Aug 19, 2013 5:39 pm
City: virginia
State: VA

D400 gearing

Post by jkeckley »

Hello,
I've got a 1970 d400. It runs great, has a 4 speed and single speed rear end. The problem is the top speed. It is wound tight at 45 mph. The rear axle is 6.20. If it would do 55, I could live with it. I've driven other big dodge trucks and none of them were geared this low! My other truck had a 6.80 rear and didn't seem geared that low. Did the np435 come with a lower 4th then 1:1? Something is strange about this truck.
I have a 5 spd out of a d500, but don't think it's an od model. Are there parts out there to change it over to an od unit?

712edf
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 4037
Joined: Fri Feb 15, 2008 8:46 pm
City: Wichita Falls
State: TX
Location: wichita falls,texas

Re: D400 gearing

Post by 712edf »

The 435 has a 1:1 direct drive 4th gear. The NP540 was available with OD. Rare altogether & even rarer in a Dodge (if ever offered). Other makes used them & there are slight differences in them all.

My truck has 6.80 and doesn't like going 45.

Taller tires?

Bucky
1966 W500
1975 W600
1978 W200 club cab

User avatar
caseman
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 302
Joined: Wed Dec 31, 1969 6:00 pm
City: Ithaca
State: NY

Re: D400 gearing

Post by caseman »

Try 7,17 In my 76 D 600 / 2 speed rear 7.17 high -9.99 in Low /318-series 3 Engine + 5 Speed Straight [No OD ] 55-60 is no problem /All so have a C 800 361 ,5 speed 7.17 Rear end /no 2 speed /My old Flatbed -tiltbed Was 1970 D 500 318-4 speed + 2speed [ 5.80-8.10. ] Sure wish It was still running all ways Got 8.5 miles to the Gallon.

Post Reply