Page 1 of 1
8.75 vent
Posted: Fri Nov 22, 2013 4:58 pm
by Jim100
How does the little cap on the vent come off and how can one tell if the vent is working?
Thanks,Jim
Re: 8.75 vent
Posted: Fri Nov 22, 2013 7:55 pm
by Hobcobble
Jim100 wrote:How does the little cap on the vent come off and how can one tell if the vent is working?
Thanks,Jim
The cap is crimped on. You should be able to wiggle it off the vent tube.
If the tube is free of any obstructions and the cap is properly installed, the
vent is working.
John
Re: 8.75 vent
Posted: Sat Mar 01, 2014 7:20 pm
by 68fish
Make sure and clean the vent bolt with brake cleaner good. It will plug up with grease over years of use. Test it out when its out of the rear. Blow in it. Cap is crimped on and meant to stay on all the time. These vents will get plugged up.
Re: 8.75 vent
Posted: Tue Mar 11, 2014 5:14 am
by wally426ci
Mine leaks. I am pretty suer they are the same as car 8-3/4 vents but need to double check..... if so they are available new.
Re: 8.75 vent
Posted: Tue Mar 11, 2014 11:04 am
by PwrWgnWalt
I believe this is common on most Mopars - it certainly is on my 71 D-100 (with 8.75 axle)...
The vent screws into the axle housing, and retains the rear axle brake line splitter. Both appear to be made of brass.
Google "Mopar axle vent", or eBay search, to see a picture of the vent.
Unscrew, blow through... If air passes, it's working.
(btw - this is how water can enter the axle when going through deep water, some attach a hose to this vent and run it up above the frame for 4-wheeling)
Walt
Re: 8.75 vent
Posted: Mon Aug 14, 2017 7:32 am
by hmaynord
well, that explains that
cleaned out the brake splitter a couple of weeks ago without removing
ever since then, been wondering, "why in the world does a brake system need a vent?"
guess that tells you the kind of ?s I'll be asking