front drivline

Engine, transmission, rear-end, driveline, etc..

front drivline

Postby RAYMAN » Fri Jan 12, 2018 8:57 pm

Does anyone have a part number for the front u-joint on the front shaft of a w-200 1968
Im old enough to know better, but young enough to do it anyway.
User avatar
RAYMAN
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 241
Joined: Mon Nov 21, 2011 8:58 pm
Location: Colville, WA
City: Colville
State: WA

Re: front drivline

Postby PowerMan » Fri Jan 12, 2018 9:33 pm

If it's the small u joint it is the 7260 series and the optional large detroit series is the 5380.
1962 W100 340 Six Pack NV4500- LU2 winch
1964 W200 340- LU2 winch
1964 W300 318- LU2 winch
1965 W200 Crew Cab 12 Valve Cummins- LU2 winch
User avatar
PowerMan
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
 
Posts: 1066
Joined: Wed Dec 31, 1969 6:00 pm
Location: Paso Robles, Ca
City: Paso Robles
State: CA

Re: front drivline

Postby RAYMAN » Fri Jan 12, 2018 9:42 pm

Thanks PowerMan Are those the only 2 options for the stock u-joint? Are those a mopar number or a napa number.
Im old enough to know better, but young enough to do it anyway.
User avatar
RAYMAN
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 241
Joined: Mon Nov 21, 2011 8:58 pm
Location: Colville, WA
City: Colville
State: WA

Re: front drivline

Postby PowerMan » Fri Jan 12, 2018 9:46 pm

They are the generic series of u joint not the part number. The large series driveshafts and u joints were an option so check that first.

5380 dimensions:
http://www.dennysdriveshaft.com/p10883_dana_spicer_5_1301x_universal_joint_greaseable_detroit_5380_.html

7260 dimensions:
http://www.dennysdriveshaft.com/p2647_neapco_1_6301_universal_joint_dodge_7260_series_with_grease_.html
Last edited by PowerMan on Fri Jan 12, 2018 9:55 pm, edited 1 time in total.
1962 W100 340 Six Pack NV4500- LU2 winch
1964 W200 340- LU2 winch
1964 W300 318- LU2 winch
1965 W200 Crew Cab 12 Valve Cummins- LU2 winch
User avatar
PowerMan
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
 
Posts: 1066
Joined: Wed Dec 31, 1969 6:00 pm
Location: Paso Robles, Ca
City: Paso Robles
State: CA

Re: front drivline

Postby RAYMAN » Fri Jan 12, 2018 9:52 pm

Thanks again. I will have to check in the morning and see what I have for size. I don't think the u-joints have ever been changed. :lol:
Im old enough to know better, but young enough to do it anyway.
User avatar
RAYMAN
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 241
Joined: Mon Nov 21, 2011 8:58 pm
Location: Colville, WA
City: Colville
State: WA


Return to *ENGINE/DRIVELINE HELP*

Who is online

Users browsing this forum: No registered users and 6 guests