I just got a '66 A100 pickup and I will be needing a few parts here and there. The truck is a basket case for the most part. Pretty much anything you can think of was unbolted from the truck. I got two rubbermade containers full of parts with the truck but I am still missing some parts. I'm sure I'll be back here looking for more parts. What I need most right now is the two engine mounting brackets that bolt to the sides of the framerails. My truck was originally a 273 truck but I have a 318/904 from a '70 Satellite to go in it. I will also need the mounts that bolts to the engine. I have seen where I can get new rubber mounts, so that isn't a problem. Luckily, an original Chrysler Parts Manual was included with the truck... so I can see what I have and don't have. Thanks for your help!
Justin
"CornDog"
New Project A100 Pickup; PARTS NEEDED
-
smalblokmopar
- Sweptline.ORG Member
- Posts: 23
- Joined: Tue Jan 15, 2008 4:12 am
- City: killeen tx
- Location: ft hood tx/ deployed to the biggest sand box ever
- Contact:
Re: New Project A100 Pickup; PARTS NEEDED
Theres a A-100 slant six van in the local pick and pull tell me what you nee I can check if it there and get you some prices.
Chuck
Chuck