Dana 70

Post by **FredM** » Sat Jul 17, 2004 8:37 am

Anyone have any parts laying around or know where there is some
parts for the 69-74 Dana 70 frontends.
can be a broken part, I'm just trying to see what all I can find

Fred

http://www.McAppys.com

PwrWgnDrvr · Post by **PwrWgnDrvr** » Tue Oct 05, 2004 9:33 pm

Doesnt look like anybody gots anything Fred. They are pretty rare. I do know that the drums dont exist new - Dodge screwed up when they built these trucks so they had Budd make special drums that were 1/2" deeper than the original plan. They only ordered 500 more drums than trucks they built, for replacements, and those are long gone. I got this info from a chrysler engineer that was involved with building them at the time.
Anyway, I got a complete axle out of a W300 I parted so I have my spare. What parts do u need in particular?

Post by **FredM** » Wed Oct 06, 2004 5:09 pm

Let's see now--parts
3.54ring and pinion
steering knuckle
tie-rod
whole housing

really, any parts that I can afford to pickup
for future use

thanks

Website · Post by **wideblock** » Wed Oct 06, 2004 5:21 pm

hey fred, was it you that had the part numbers for the speedo gears? i need a 3.54 set for my 69 d200 with the np435. right now its set up for 4.10's, but they aint staying long.

Post by **FredM** » Wed Oct 06, 2004 9:50 pm

yep I did-- key word --did
did post them on this forum befor it moved, is there archives?

tire size has to do with the gear number as well as the rearend ratio
a good trans shop might be able to steer you real close

Website · Post by **wideblock** » Thu Oct 07, 2004 7:41 am

a good tranny shop in this one horse town???>HAHAHAHAHAHAHAHAA! my guys good, but when it comes to stuff like that he always trys to send me to the dealer. maybe ill check el paso.

vf4x · Post by **vf4x** » Thu Oct 14, 2004 11:29 am

Post at the Power Wagon site for Dana 70 parts.

Hoss · Post by **Hoss** » Fri Nov 12, 2004 2:15 pm

Fredm,
I have a set of Dana 70 axles that are set up for dual wheels with the 6x7.25 bolt pattern and I believe 4:88.1 gearing but I'll have to check.
I also have a full set of dually wheels that go with it.
Located in Longmont Colorado north of Denver about 35 miles
Ken

Post by **FredM** » Sun Nov 14, 2004 11:52 am

Hi,
How much do you want for them?
I might be able to use some of the parts, but am looking for the 8 lug style.

Steve if you are reading, these might be what you are looking for

Thanks

Red · Post by **Red** » Sun Nov 14, 2004 2:55 pm

Trey, the part # I got for the 3.54 with 7.50x16 tires is 2204-357, thats with a 727, dont know if its different for the NP435. The local dealer put it out on the locator and nobody`s got one.

Hoss · Post by **Hoss** » Sun Nov 14, 2004 6:46 pm

Fredm what I would like is a set of dually axles from an 80 dodge or a 80s chevy so i can get the updated brakes, 8 lugs and the open knuckles.
If I were to purchase them seperate it would run around 2 grand.
Ken

PwrWgnDrvr · Post by **PwrWgnDrvr** » Tue Nov 16, 2004 10:20 pm

Hoss, what size wheels? 16's?

Hoss · Post by **Hoss** » Wed Nov 17, 2004 9:51 am

16" split rims
Ken

doug cartwright · Post by **doug cartwright** » Wed Nov 24, 2004 11:38 pm

Fred, check out ebay # 7936867871

digdoug · Post by **digdoug** » Thu Dec 09, 2004 8:50 pm

Anybody near Wister Oklahoma? check out ebay #7940149202

Post by **FredM** » Wed Dec 22, 2004 9:21 am

Doug,
Thanks, for the tip.

Got the complete Dana 70 with tie rod for $280.