Dana 70
Dana 70
Anyone have any parts laying around or know where there is some
parts for the 69-74 Dana 70 frontends.
can be a broken part, I'm just trying to see what all I can find
Fred
http://www.McAppys.com
parts for the 69-74 Dana 70 frontends.
can be a broken part, I'm just trying to see what all I can find
Fred
http://www.McAppys.com
-
- Sweptline.ORG Pioneer
- Posts: 7365
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Doesnt look like anybody gots anything Fred. They are pretty rare. I do know that the drums dont exist new - Dodge screwed up when they built these trucks so they had Budd make special drums that were 1/2" deeper than the original plan. They only ordered 500 more drums than trucks they built, for replacements, and those are long gone. I got this info from a chrysler engineer that was involved with building them at the time.
Anyway, I got a complete axle out of a W300 I parted so I have my spare. What parts do u need in particular?
Anyway, I got a complete axle out of a W300 I parted so I have my spare. What parts do u need in particular?
- wideblock
- Founding Member
- Posts: 5617
- Joined: Wed Dec 31, 1969 6:00 pm
- City: las cruces nm
- State: NM
- Location: Las Cruces, New Mexico
- Contact:
hey fred, was it you that had the part numbers for the speedo gears? i need a 3.54 set for my 69 d200 with the np435. right now its set up for 4.10's, but they aint staying long.
Trey
1965 CSS Utiline.
ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100
"i don't know it all, but i know enough to be dangerous"
1965 CSS Utiline.
ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100
"i don't know it all, but i know enough to be dangerous"
yep I did-- key word --did
did post them on this forum befor it moved, is there archives?
tire size has to do with the gear number as well as the rearend ratio
a good trans shop might be able to steer you real close
did post them on this forum befor it moved, is there archives?
tire size has to do with the gear number as well as the rearend ratio
a good trans shop might be able to steer you real close
ENJOY LIFE, --- It's the longest thing anyone ever does-- --
When seconds count, Help is only minutes away-----------------
When seconds count, Help is only minutes away-----------------
- wideblock
- Founding Member
- Posts: 5617
- Joined: Wed Dec 31, 1969 6:00 pm
- City: las cruces nm
- State: NM
- Location: Las Cruces, New Mexico
- Contact:
a good tranny shop in this one horse town???>HAHAHAHAHAHAHAHAA! my guys good, but when it comes to stuff like that he always trys to send me to the dealer. maybe ill check el paso.
Trey
1965 CSS Utiline.
ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100
"i don't know it all, but i know enough to be dangerous"
1965 CSS Utiline.
ex trucks:
70 D100
66 d100
66 d100
67 d100
69 d100
69 d200 crew cab
65 crew cab
66 d100
66 d100
"i don't know it all, but i know enough to be dangerous"
Fredm,
I have a set of Dana 70 axles that are set up for dual wheels with the 6x7.25 bolt pattern and I believe 4:88.1 gearing but I'll have to check.
I also have a full set of dually wheels that go with it.
Located in Longmont Colorado north of Denver about 35 miles
Ken
I have a set of Dana 70 axles that are set up for dual wheels with the 6x7.25 bolt pattern and I believe 4:88.1 gearing but I'll have to check.
I also have a full set of dually wheels that go with it.
Located in Longmont Colorado north of Denver about 35 miles
Ken
68 W300 "Big John"
64 Belvedere 426 wedge 4 speed
64 Belvedere 426 wedge 4 speed
Hi,
How much do you want for them?
I might be able to use some of the parts, but am looking for the 8 lug style.
Steve if you are reading, these might be what you are looking for
Thanks
How much do you want for them?
I might be able to use some of the parts, but am looking for the 8 lug style.
Steve if you are reading, these might be what you are looking for
Thanks
ENJOY LIFE, --- It's the longest thing anyone ever does-- --
When seconds count, Help is only minutes away-----------------
When seconds count, Help is only minutes away-----------------
- Red
- Sweptline.ORG Member
- Posts: 465
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Central east Missouri
- Contact:
Trey, the part # I got for the 3.54 with 7.50x16 tires is 2204-357, thats with a 727, dont know if its different for the NP435. The local dealer put it out on the locator and nobody`s got one.
I was a cute baby. My mom said when I was born they threw away the mold. Some of it grew back- Emo Phillips
http://community.webshots.com/user/greenbean119
http://community.webshots.com/user/greenbean119
-
- Sweptline.ORG Pioneer
- Posts: 7365
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA