Another Power steering thread.

[DavidBW200]

Mine was converted sometime in the late 1990's by a previous owner. I have not had luck figuring out my what steering box I have. I sent pictures to Redhead Steering boxes, a rebuilder, I called Borgeson to inquire about a box that is part of one of their conversions that looks a lot like it, the guy I got wasn't willing to help. I've searched pretty thoroughly and scrolled through pages of pictures, no luck in getting a solid answer as to what box this is. Really hoping someone here knows something.

This is the box I have. It spews fluid from the output shaft, running or not.

[DavidBW200]

Here is the bracket they made to mount it. It works, I am going to improve on it if I use this same box again, they used spacers they could have avoided using with different bolts.

[DavidBW200]

Here's my truck in my shop.

[DavidBW200]

Here's the other half of the project. The column doesn't line up with the shaft, and the joint rubbed on badly cut way body metal.





This is after I cut away all the sharp metal and ground off the bed liner, caulking, and spray foam.

[PwrWgnDrvr]

No images

[DavidBW200]

Crap! I'll have to fix that after dinner.

[DicksDodge]

Seems like you didn't figure out the pics. Would love to see them. PM me if you can, or drop me a note and I'll send you my email. Getting ready to do the final work on my 70 and PS is a must.

[BigBlockTrucks]

I am curios also of the conversion, what was available then? I Also got no pics.