1980 disc dana 44 into 70 w-100
Posted: Thu Oct 26, 2017 8:05 am
I finally acquired a disc dana 44 in the form of a 1980 with locking hubs.
The right side has bolts sticking out of the center section so there must be a plate then that goes over the top of springs to other u-bolt?
I will have to move shock mounts to opposite side.
I can use my 70 drag/center link?
Master cylinder for disc drums.
Proportioning valve for disc drum.
Any other tips? Im in no hurry luckily.
Thanks,
jim
The right side has bolts sticking out of the center section so there must be a plate then that goes over the top of springs to other u-bolt?
I will have to move shock mounts to opposite side.
I can use my 70 drag/center link?
Master cylinder for disc drums.
Proportioning valve for disc drum.
Any other tips? Im in no hurry luckily.
Thanks,
jim