tailgate lettering

This area is for the Powerwagon 4X4 Enthusiast!
Post Reply
ekim
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 1
Joined: Fri Apr 07, 2017 2:35 pm
City: camano island
State: WA

tailgate lettering

Post by ekim »

i'm using a later model tailgate on my 69 w200 and will be painting the lettering on but since i don't have the factory gate i need some measurements.i need the width of the letters and the spacing between them, since the second d is centered on the handle i should be able to figure it out from there.i'll even take a measurement from the side to the first letter d and if i know that and letter width i could figure the rest.could use any help thanks.

Post Reply