Warn hub restoration

This area is for the Powerwagon 4X4 Enthusiast!

Warn hub restoration

Postby 935guy » Fri Sep 02, 2016 11:09 am

I am closing in on the completion of my '70 W-200 project.
I have spent a lot of time and effort to get it right.
My front hubs look like **** and I would like to get them cleaned up and looking good.

Does anyone restore the Warn hubs to new original condition ?
I think they are M-7's, not sure however. I need to look and verify.
My photo is "too big" to post.

Thanks in advance,
Woody
935guy
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 105
Joined: Mon Mar 16, 2009 3:01 pm
City: Lakewood,Wa.

Re: Warn hub restoration

Postby 935guy » Sat Sep 17, 2016 2:01 pm

I have located a factory service manual for my Warn hubs. They are not as complicated as I had imagined.
935guy
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 105
Joined: Mon Mar 16, 2009 3:01 pm
City: Lakewood,Wa.

Re: Warn hub restoration

Postby 2318PowerWagon » Sun Dec 18, 2016 1:50 pm

935guy. I too am interested in restoring my hubs on my 70 W200, mine are in good shape, I have a few springs behind the lock out dial that are stretched & need replaced plus I need new gaskets, do you have any leads on parts?
Justin M. Blair
2318PowerWagon
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 62
Joined: Mon Dec 12, 2016 3:39 pm
City: Lakehills
State: TX

Re: Warn hub restoration

Postby dodgeboykim » Sun Dec 18, 2016 2:44 pm

2318PowerWagon wrote:935guy. I too am interested in restoring my hubs on my 70 W200, mine are in good shape, I have a few springs behind the lock out dial that are stretched & need replaced plus I need new gaskets, do you have any leads on parts?



Parts should be available from Warn. :thinking :thinking
My truck is younger than me.
66 W100. 70 D 500 with 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 L/B 360 auto on propane.
User avatar
dodgeboykim
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
 
Posts: 2202
Joined: Wed Dec 31, 1969 6:00 pm
Location: chilliwack.
City: Chilliwack. B.C. Canada
State: Foreign

Re: Warn hub restoration

Postby 2318PowerWagon » Sun Dec 25, 2016 5:05 am

I found the rebuild kit w/gaskets & orings for our hubs btw i found the stamp M166 after we thoroughly cleaned them in the parts washer.
Attachments
image.jpeg
Kit i purchased on ebay
image.jpeg (27.38 KiB) Viewed 211 times
Justin M. Blair
2318PowerWagon
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 62
Joined: Mon Dec 12, 2016 3:39 pm
City: Lakehills
State: TX


Return to POWERWAGON 4X4 DISCUSSION

Who is online

Users browsing this forum: No registered users and 1 guest