Page 1 of 1

1980 dana 44

Posted: Sat Jul 09, 2016 10:31 am
by Jim100
I found a 80 dana 44 at a near by u-pick. manual locking hubs five on 5.5. disc brakes.
If I go after this thing should I try to un bolt it or take a cordless saws all and cut it loose?
200 bucks fair?
Thanks jim

Re: 1980 dana 44

Posted: Sat Jul 09, 2016 12:23 pm
by soopernaut
I would think $200 is good if it has a gear ratio you want/need. The other question I'm not sure. If it was driven in Michigan winters you may be dealing with rusty fasteners.

Re: 1980 dana 44

Posted: Sun Jul 10, 2016 6:51 pm
by Jim100
Do I need to also get the drag link or is the sweptline link used? Any other suggestions?
Thanks all.
jim

Re: 1980 dana 44

Posted: Mon Jul 11, 2016 11:32 am
by soopernaut