The bottom of my back of rear shackle bushing looks bad. (gone). 1970 W-100. I have searched but not located a refrence to what and where I might find these. Any ideas?
Thanks. jim
bottom bushing of rear spring shackle 70 W-100
- marklein
- Sweptline.ORG Member
- Posts: 607
- Joined: Sun Nov 11, 2012 9:55 am
- City: Red Deer
- State: Foreign
Re: bottom bushing of rear spring shackle 70 W-100
What size bolt? 1/2 or 3/4? The 3/4 is Moog #SB268, the 1/2 is SB266, just bought both sets from Rockauto.
Re: bottom bushing of rear spring shackle 70 W-100
Thanks for the help. The bolt itself measures what looks to be 5/8ths. Figures. Its a half ton so Im thinking the smaller bolt?
jim
jim
Re: bottom bushing of rear spring shackle 70 W-100
How do you get those bolts out? I got the nut off (15/16) but cant move the bolt. 3/4 head. Is it threaded or driven into the hanger sides? Cut it apart and replace?
Thanks Jim
Thanks Jim
Re: bottom bushing of rear spring shackle 70 W-100
I got the bolt out of one side in one piece and it measures exactly 5/8. The old bushing came out in pieces. I scraped and cleaned out the inside of the bottom hole of the shackle.
The new bushing is for a half inch bolt and measures an inch outside and fits in the shackle rather loosely. Should'nt it be tight?
Is there a bushing that is between the one for a half inch bolt and one for a three quarter inch? 5/8?
The new bushing is for a half inch bolt and measures an inch outside and fits in the shackle rather loosely. Should'nt it be tight?
Is there a bushing that is between the one for a half inch bolt and one for a three quarter inch? 5/8?