I have a 1967 D100, converted to a W200 with what appears to be 1971-1972 Dana 44 axle in the front. I need wheel cylinders, everything I find is made for a round hole in the backing plate, but my backing plates have a football shaped hole. The casting number is ; Bendix 2227391-L & 2227391-R on the cylinders .
Anybody have any idea's? Tim
Wheel cylinder for front axle
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3016
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: Wheel cylinder for front axle
tguinn wrote:I have a 1967 D100, converted to a W200 with what appears to be 1971-1972 Dana 44 axle in the front. I need wheel cylinders, everything I find is made for a round hole in the backing plate, but my backing plates have a football shaped hole. The casting number is ; Bendix 2227391-L & 2227391-R on the cylinders .
Anybody have any idea's? Tim
Pic of offending part. I used to have a 71 W200 and most if not all the brake parts were the same as my 66 W100 I still have.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
Re: Wheel cylinder for front axle
Those part numbers are available NOS $45 from Collectors Supply. The catalog shows them to be a 1960-68 part number though?tguinn wrote:I have a 1967 D100, converted to a W200 with what appears to be 1971-1972 Dana 44 axle in the front. I need wheel cylinders, everything I find is made for a round hole in the backing plate, but my backing plates have a football shaped hole. The casting number is ; Bendix 2227391-L & 2227391-R on the cylinders .
Anybody have any idea's? Tim
1970 W200
318, NP 445
Factory LU-2 winch
A/C, HD Gauges
318, NP 445
Factory LU-2 winch
A/C, HD Gauges
Re: Wheel cylinder for front axle
Powerwagon54 was kind enough to provide this for me; all the books that I looked in showed 60-68 dodge trucks as all the same, and looking by the axles (71-72) didn't help either. Turns out the Raybestos number is WC36050 (left) WC36061(right), and O Reilly brake best #'s WC40416 and Wc40417. Tim
- rickharrold
- Sweptline.ORG Member
- Posts: 84
- Joined: Sun Aug 15, 2010 9:35 am
- City: blackwell
- State: OK
Re: Wheel cylinder for front axle
Just put O'Reilly brakebest WC24954, WC24955 on my 70 W100 with dana 44 on today. Frist got brakebest WC40951 and WC40952, fit the backing plate but my brake line was to big for cyl. $15.04 for 54 and $13.52 for 55.