Winch Centered between Fram rails?
Winch Centered between Fram rails?
I've pulled the Ramsey winch from the front of my truck to rebuild the winch, replace the winch mounts and finish the bumper. While mocking up the new mounts, I noticed the winch wasn't centered, its shifted toward the drivers side by a few inches. Ostensibly to minimize the amount of hacking the installer had to do 48 years ago. Does this matter? Since the cable travels across the width of the drum, would only be pulling from the center once during each layer. The winch originally did not have a fair lead, my new bumper will have a roller fair lead integrated into it. Is the winch/drum centered on other members trucks?
-
- Sweptline.ORG Pioneer
- Posts: 4035
- Joined: Fri Feb 15, 2008 8:46 pm
- City: Wichita Falls
- State: TX
- Location: wichita falls,texas
Re: Winch Centered between Fram rails?
As long as the center line of the truck passes through a portion of the drum area you should be fine. Yes closer to center the better though.
Bucky
Bucky
1966 W500
1975 W600
1978 W200 club cab
1975 W600
1978 W200 club cab
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3013
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: Winch Centered between Fram rails?
If its close its good enough. I wouldn't worry about it. That's from my 40 years using PTO and Electric as well as Hydraulic winches.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
- WD
- Sweptline.ORG Pioneer
- Posts: 1741
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Rosemark
- State: TN
- Location: Lancaster Plantation
Re: Winch Centered between Fram rails?
Should be fine. Mine is pedestal mounted in the bed, and is a dual cable unit off a MS Gulf trawler.
If I didn't build it, it ain't mine.
1949 Dodge B1B-108; 1969 D100-128; 72 Super Beetle; and a bunch of others...
1949 Dodge B1B-108; 1969 D100-128; 72 Super Beetle; and a bunch of others...
Re: Winch Centered between Fram rails?
Awesome guys thanks for the info. And to seal the deal, this '64 W30 clearly has the factory Braden winch mounted way off center.
http://www.ebay.com/itm/Dodge-Other-Pic ... 1994029144
http://www.ebay.com/itm/Dodge-Other-Pic ... 1994029144