I am wondering if 17.5 rims from a DRW truck will fit on the front axle of a SRW truck and allow it to roll on a trailer? No turning required, just rolling forward and backward..
The grand plan is to put a SRW W300 rolling chassis on a U-haul trailer. It has 9.00-16 tires on it.. My D300 has 8.00-17.5's and I am thinking that tire strap will fit that much better than the larger tires..
all thoughts and opinions regarding this plan are welcome..
SRW-DRW Related questions on a W300
-
- Sweptline.ORG Member
- Posts: 49
- Joined: Tue Sep 20, 2011 12:26 pm
- City: 05661
- State: VT
Re: SRW-DRW Related questions on a W300
The 17.5 wheels, I would think, will have to be installed "backwards"...dish facing outward. Is the trailer wide enough for the increase in the track width?
-
- Sweptline.ORG Member
- Posts: 49
- Joined: Tue Sep 20, 2011 12:26 pm
- City: 05661
- State: VT
Re: SRW-DRW Related questions on a W300
I doubt it... from my measurements on the D 300, the front wheels are about 74", and the trailer is 79.5...
Re: SRW-DRW Related questions on a W300
it should fit the normal way. the stud flange on front of W300 sticks way out whether DRW or SRW