dana 44 closed knuckle bearing

This area is for the Powerwagon 4X4 Enthusiast!
Post Reply
Jim100
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 829
Joined: Sun May 03, 2009 6:16 pm
City: Kalamazoo/MI

dana 44 closed knuckle bearing

Post by Jim100 »

I one were to replace the bearing and or bronze bushing on the steering knuckle what all needs to be taken apart to get at them?
Thanks,
jim

User avatar
Hobcobble
Forum Moderator
Forum Moderator
Posts: 14573
Joined: Wed Dec 31, 1969 6:00 pm
Location: Lockport, NY

Re: dana 44 closed knuckle bearing

Post by Hobcobble »

The roller bearings are in the hub, so its not much trouble to replace them.
If you're not handy with a hammer & punch though.... you might want to
take the hubs to a machine shop and have them install the races.

For the spindle work.... this might give you an idea as to what needs to
be taken apart to replace them.... :study
http://www.sweptline.org/suspension63_68/02-05.gif
John

Jim100
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 829
Joined: Sun May 03, 2009 6:16 pm
City: Kalamazoo/MI

Re: dana 44 closed knuckle bearing

Post by Jim100 »

Nice print.
Thanks!
jim

Post Reply