I one were to replace the bearing and or bronze bushing on the steering knuckle what all needs to be taken apart to get at them?
Thanks,
jim
dana 44 closed knuckle bearing
Re: dana 44 closed knuckle bearing
The roller bearings are in the hub, so its not much trouble to replace them.
If you're not handy with a hammer & punch though.... you might want to
take the hubs to a machine shop and have them install the races.
For the spindle work.... this might give you an idea as to what needs to
be taken apart to replace them....
http://www.sweptline.org/suspension63_68/02-05.gif
John
If you're not handy with a hammer & punch though.... you might want to
take the hubs to a machine shop and have them install the races.
For the spindle work.... this might give you an idea as to what needs to
be taken apart to replace them....
http://www.sweptline.org/suspension63_68/02-05.gif
John
Re: dana 44 closed knuckle bearing
Nice print.
Thanks!
jim
Thanks!
jim