Parts questions

This area is for the Powerwagon 4X4 Enthusiast!
Post Reply
67cspowerwagon
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 117
Joined: Mon Sep 27, 2010 2:51 pm
City: maple valley
State: WA

Parts questions

Post by 67cspowerwagon »

Ok I been thinking of sell some parts off drums Dana 44 front ends 60's rears 435trans and 201's good running 383 with all parts to swap a small block to big block is their people that want this stuff? in western washington? ideas?

User avatar
Jims68
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 3126
Joined: Wed Dec 31, 1969 6:00 pm
City: Edgewater Park
State: NJ
Location: Southern New Jersey
Contact:

Re: Parts questions

Post by Jims68 »

Make a list, add prices and your location and then post the stuff in the "Trucks and Parts for sale" section of the forum.

67cspowerwagon
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 117
Joined: Mon Sep 27, 2010 2:51 pm
City: maple valley
State: WA

Re: Parts questions

Post by 67cspowerwagon »

that why I ask the question here Is what do you guys think it worth?

User avatar
Jims68
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 3126
Joined: Wed Dec 31, 1969 6:00 pm
City: Edgewater Park
State: NJ
Location: Southern New Jersey
Contact:

Re: Parts questions

Post by Jims68 »

67cspowerwagon wrote:that why I ask the question here Is what do you guys think it worth?
Sorry, I mis-understood what you meant. Unfortunately, I cannot answer what it is worth. List the stuff as Best Offer? :thinking Good Luck! :salut

User avatar
Hobcobble
Forum Moderator
Forum Moderator
Posts: 14573
Joined: Wed Dec 31, 1969 6:00 pm
Location: Lockport, NY

Re: Parts questions

Post by Hobcobble »

67cspowerwagon wrote:Ok I been thinking of sell some parts off drums Dana 44 front ends 60's rears 435trans and 201's good running 383 with all parts to swap a small block to big block is their people that want this stuff? in western washington? ideas?
All depends on the condition of these parts. On drums, you'd need to verify if they're still within
spec. or turned beyond further use. You'll be playing to a local market on the axles, trannys and
t-cases. Gear ratios of axles will determine their worth as well.... Probably not a ton of guys out there
dying for a pair of axles with 4.88 gears... but the 4.10 or 3.54 geared axles might be something a
guy would drive to your location to pick up. :2cents

In short.... Yes. There are folks who want these parts. It might take you a good while
to sell them though due to them being "Pick Up in WA" parts.

Do you have a pair of lift blocks for a pre-'69 W100/W200 rear axle?? That's something
I could use.... :idea :Thumbsup
John

lbman
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 100
Joined: Tue Oct 05, 2010 7:24 am
City: Deming
State: WA
Location: in da woods

Re: Parts questions

Post by lbman »

any parts for a 63W200 Ambulance body parts that is
Id love to have the 383 conversion how much do you want for it? what shape is it in, IE. compression? I live in Deming WA.
I also need a transmission/drive line brake cable.
LB

User avatar
Roxyflash
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 705
Joined: Sat Nov 06, 2010 6:47 pm
City: East Moline
State: IL

Re: Parts questions

Post by Roxyflash »

Is this a hyd bellhousing 383?

Post Reply