Do the wheel bearings need to be greesed on this axle via taking the hubs apart?
Thanks jim
closed knuckle 44
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3012
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: closed knuckle 44
You bet. A lot more work than a 2 wheel drive though.
Re: closed knuckle 44
Yes indeed!dodgeboykim wrote:You bet. A lot more work than a 2 wheel drive though.
John
Re: closed knuckle 44
Great. How many of the hex bolts holding in the locking bit are going to snap or round out? If I have not greesed the bearings in a long time then I am sure they are due ? Several years.
Thanks guys.
Jim
Thanks guys.
Jim
- gotAgreenMachine
- Sweptline.ORG Member
- Posts: 3
- Joined: Thu May 15, 2014 11:16 pm
- City: Oakland
- State: CA
Re: closed knuckle 44
And if I have broken the nuckle housing where would be a good start to find a replacement? Dana 44hd 3000 casting # c31412
Last edited by gotAgreenMachine on Fri May 16, 2014 6:02 pm, edited 2 times in total.
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3012
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
-
- Sweptline.ORG Member
- Posts: 117
- Joined: Mon Sep 27, 2010 2:51 pm
- City: maple valley
- State: WA
Re: closed knuckle 44
I have both for sale 67 dana 44 and a 74 with disc brakes both 4.09 gear