Need a Knuckle

This area is for the Powerwagon 4X4 Enthusiast!

Need a Knuckle

Postby powerwagonpaul » Thu Oct 11, 2012 12:18 pm

anyone parting out a 69 and later power wagon? i need a steering knuckle for my 69 w200, drivers side. also need the knuckle arm that ataches on top and goes to the drag link, with shims. the bearing (king) pin broke off and all the studs striped and pulled out.
User avatar
powerwagonpaul
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 119
Joined: Mon Dec 24, 2007 5:01 pm
City: Las Vegas Nevada

Re: Need a Knuckle

Postby powerwagon54 » Thu Oct 11, 2012 6:58 pm

pm sent
User avatar
powerwagon54
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
 
Posts: 1046
Joined: Wed Dec 31, 1969 6:00 pm
City: Washougal
State: WA

Re: Need a Knuckle

Postby powerwagonpaul » Sat Oct 13, 2012 7:30 am

powerwagon54 has the knuckle! i would prefer to get both pieces from the same truck, i possible. if not, anyone have the steering arm to go with pw54's knuckle?
User avatar
powerwagonpaul
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 119
Joined: Mon Dec 24, 2007 5:01 pm
City: Las Vegas Nevada

Re: Need a Knuckle

Postby dodgeboykim » Thu Mar 21, 2013 9:49 pm

Its been awhile but did you find the last part you needed.
User avatar
dodgeboykim
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
 
Posts: 2233
Joined: Wed Dec 31, 1969 6:00 pm
Location: chilliwack.
City: Chilliwack. B.C. Canada
State: Foreign

Re: Need a Knuckle

Postby gotAgreenMachine » Fri May 16, 2014 9:59 am

I'm looking for a nuckle set also I happened to break the right passenger side housing anyone have ideas on a power wagon grave yard in the west coast not her CA?
User avatar
gotAgreenMachine
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 3
Joined: Thu May 15, 2014 11:16 pm
City: Oakland
State: CA

Postby nytemuvr » Fri May 16, 2014 10:16 am

.
User avatar
nytemuvr
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
 
Posts: 907
Joined: Tue Apr 10, 2012 9:49 pm
City: Rio Linda
State: CA

Re: Need a Knuckle

Postby dodgeboykim » Fri May 16, 2014 11:55 am

gotAgreenMachine wrote:I'm looking for a nuckle set also I happened to break the right passenger side housing anyone have ideas on a power wagon grave yard in the west coast not her CA?



I have large and small knuckles. P M me for what you need exactly. I should have it.
User avatar
dodgeboykim
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
 
Posts: 2233
Joined: Wed Dec 31, 1969 6:00 pm
Location: chilliwack.
City: Chilliwack. B.C. Canada
State: Foreign

Re: Need a Knuckle

Postby dodge59pw » Tue Oct 27, 2015 6:03 pm

Do you have a closed knuckle for a 1959 powerwagon? Dana 44 axle.
dodge59pw
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 1
Joined: Tue Oct 27, 2015 1:22 pm
City: Clearwater
State: KS

Re: Need a Knuckle

Postby powerwagon54 » Tue Oct 27, 2015 7:45 pm

I may have it.
User avatar
powerwagon54
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
 
Posts: 1046
Joined: Wed Dec 31, 1969 6:00 pm
City: Washougal
State: WA

Re: Need a Knuckle

Postby dodgeboykim » Tue Oct 27, 2015 8:37 pm

If PW 54 does not have one, I might. :thinking
My truck is younger than me.
66 W100. 70 D 500 with 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 L/B 360 auto on propane.
User avatar
dodgeboykim
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
 
Posts: 2233
Joined: Wed Dec 31, 1969 6:00 pm
Location: chilliwack.
City: Chilliwack. B.C. Canada
State: Foreign

Re: Need a Knuckle

Postby rgonz8 » Wed Dec 02, 2015 10:11 am

I have a complete Dana 44 HD, 8 lug, closed knuckle, 4.10, out of a 1963 W100 (same as W200) up for grabs. Located in Santa Fe, NM.
rgonz8
Sweptline.ORG Member
Sweptline.ORG Member
 
Posts: 6
Joined: Tue Jan 06, 2015 9:11 am
City: Santa Fe
State: NM


Return to POWERWAGON 4X4 DISCUSSION

Who is online

Users browsing this forum: No registered users and 1 guest