Page 1 of 1
w300 rear
Posted: Wed Jul 06, 2011 7:47 am
by reallylongnickname
U guys got a trick for taking out those cone shape locking (washers) on rear wheels? When take out the 8 bolts that hold the rear axle - those are the ones I'm talking about. I have the w300. Chisel & hammer I've tried, but they're really stuck.
Re: w300 rear
Posted: Wed Jul 06, 2011 9:21 am
by crusty
I take a mini sledge and gently tap the sides of the shaft flange after the nuts are off. Usually, a few times around the edge and it slides out.
Re: w300 rear
Posted: Wed Jul 06, 2011 10:17 am
by Hobcobble
A sharp rap with a hammer on the center of
the axle flange has always popped them out
for me.
John
Re: w300 rear
Posted: Thu Jul 07, 2011 2:10 pm
by RussRoth
Hobcobble wrote:A sharp rap with a hammer on the center of
the axle flange has always popped them out
for me.
John
Absolutely!
And don't be at all bashful.
Re: w300 rear
Posted: Fri Jul 08, 2011 7:53 pm
by reallylongnickname
Thx guys, it worked like a charm.