utiline runningboards
- 68dually
- Sweptline.ORG Member
- Posts: 227
- Joined: Sat Mar 12, 2011 8:07 pm
- City: turbotville
- State: PA
utiline runningboards
hi, does anyone make repro runningboards for utiline beds? i need dually ones but at this point i'm thinking about making them from several sets of short ones. if you can help me i would be greatful. thanks,Randal
- Jones
- Sweptline.ORG Pioneer
- Posts: 938
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Castle Rock/WA
- State: WA
- Location: Castle Rock, Washington
Re: utiline runningboards
These are short ones. There might be others too.
http://www.horkeyswoodandparts.com/index.html
Keith
http://www.horkeyswoodandparts.com/index.html
Keith
- 68dually
- Sweptline.ORG Member
- Posts: 227
- Joined: Sat Mar 12, 2011 8:07 pm
- City: turbotville
- State: PA
Re: utiline runningboards
thanks keith, Randal
Re: utiline runningboards
the bed steps are the same as the single wheel 9' bed. the piece between the step and the fender could be fabricated . the first duall wheel bed i saw ,i thought the owner pieced it together and was tring to pull a fast one.