63w200 closed knuckle

[lbman]

does anyone have a exploded view of a closed knuckle assy.
while i was preping the ambulance for tow . i lifted front right up to put on a tire with air and hub wobbles BAD ! : i pulled locking hub and bearing adjuster bolt is lock by a fold ing tab so it did not just come out of adjustment (not good) i had visions of lost wheel. WASP tellin me bad things about towing rigs down there hiway , big ticketts. i will now have to trailer "ambi" home....
both my PW's have same running gear. i got to get my hands on a manual. i have 80 vintage ford books but they were open type.
\also a piece of the glass in door came out when i shut it now i need to find door glass for a 63 W200 ambulance..anyone got 1 of dat layin around. yasuryabetya
thanks for all your help great board
Larry

[Hobcobble]

does anyone have a exploded view of a closed knuckle assy.
while i was preping the ambulance for tow . i lifted front right up to put on a tire with air and hub wobbles BAD ! : i pulled locking hub and bearing adjuster bolt is lock by a fold ing tab so it did not just come out of adjustment (not good) i had visions of lost wheel. WASP tellin me bad things about towing rigs down there hiway , big ticketts. i will now have to trailer "ambi" home....
both my PW's have same running gear. i got to get my hands on a manual. i have 80 vintage ford books but they were open type.
\also a piece of the glass in door came out when i shut it now i need to find door glass for a 63 W200 ambulance..anyone got 1 of dat layin around. yasuryabetya
thanks for all your help great board
Larry

You'll likely need a Factory Service Manual [FSM].
They can be purchased here.....
www.autobooksbishko.com
They can also be found on Ebay from
time to time.
John

[Hobcobble]

Here's one from this forum's on-line parts
manual.....
http://sweptline.org/suspension63_68/02-05.gif

Your ambulance has a lot of cool things going for
it. It may also require a lot of time and money to
make it fit and reliable for the road. Good luck
with your project.
John

[powerwagon54]

pm sent

[lbman]

thanks for the pics, and info i am searching for a good manual. i do pretty good with the "take it apart slow" so it can go back the same way it came apart. or even making it better. but i do like pictures lots and lots of pics.
thanks,
Larry B

[demulsion]

You will love the manual that John linked to! Keep your eye out on ebay, I have gotten a few there.

As for the door glass, does your ambulance use the sweptline doors, or are they part of the ambulance body? I have a bunch of sweptline glass sitting around. Otherwise if it is just flat glass from an ambulance body, any glass shop should be able to cut you a piece.