Motor swap. PTO front shaft ?

This area is for the Powerwagon 4X4 Enthusiast!
Post Reply
User avatar
CMR70D3
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 238
Joined: Fri Mar 05, 2010 10:02 pm
City: Martinsville
State: IN
Location: Southwest of Indy

Motor swap. PTO front shaft ?

Post by CMR70D3 »

Hi,
Wanting to swap from a 318 to a 383 in my 70' w100 with winch. So my question is will the front PTO shaft still fit with the 383, Also will I be able to put headers on or not?

Thanks,
Chris
71' D100 "Custom 100" LWB, 383 BB,AT,PS,PB,AC,BUCKET SEATS
Chris
Top
User avatar
RussRoth
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1345
Joined: Wed Dec 31, 1969 6:00 pm
City: Vancouver, WA
Location: Vancouver, WA
Contact:
Contact RussRoth

Re: Motor swap. PTO front shaft ?

Post by RussRoth »

Mine does on my '67 W and I have headers but they required modification to fit on mine because of the hydraulic clutch with the cross member at the bell housing. However, my winch was not a factory install because the winches were all going to the Military at that time. :pale :pale :banghead :banghead
RR
Vancouver, WA

'67 W200/450 CID
AA OD/SM465/205
PTO winch
4.10 powerlock
8R19.5 tires
Top
Post Reply

Return to “POWERWAGON 4X4 DISCUSSION”