W500 PTO

This area is for the Powerwagon 4X4 Enthusiast!
Post Reply
Bristlecone
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 30
Joined: Thu Jan 21, 2010 9:20 am
City: Lake Oswego
State: OR

W500 PTO

Post by Bristlecone »

I'm currently shopping around for a W500 powerwagon, and was curious about how difficult it is to find a PTO for these trucks. Is this a wrecking yard find, or are they plentiful enough to come up on forums like this one periodically? A few of the trucks I've looked at don't have PTO's, and I would eventually like to add a winch, and maybe a dump flatbed. Any help, and advice is much appreciated. Derek.

712edf
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 4041
Joined: Fri Feb 15, 2008 8:46 pm
City: Wichita Falls
State: TX
Location: wichita falls,texas

Re: W500 PTO

Post by 712edf »

Well I believe the t-case & both types of trannys usually found in W500s were available with PTO, but not necessarily in the actual W500 itself. I think the T-case is a Rockwell, The trannys are usually New Process. In other words I wouldn't limit my looking only to Dodge W500s for parts, but any large vehicle with similar components. The W500 wrecker f/s in Mass on Joe's PW site I believe has all the PTO stuff intact. Big Internationals shared some drivetrain parts with the W500 too.

Bucky
1966 W500
1975 W600
1978 W200 club cab

Kaegi
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1388
Joined: Tue Mar 18, 2008 12:49 am
City: Allyn WA

Re: W500 PTO

Post by Kaegi »

IF the truck has the NP 541 5 speed the PTOs are like hens teeth. somebody over on the Power Wagon forum was looking for a long time and finally found one. Jerry I think was who. Anyway, if you have the NP420 or NP435 then PTO is no problem. go to job rated .com and email dave.

coxautomotive
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 1
Joined: Sun Feb 28, 2010 3:32 pm
City: Sewickley
State: PA

Re: W500 PTO

Post by coxautomotive »

If you are in need of a PTO, I have the original NP435 4 speed with the Chelsea PTO unit from my 71 D400. I am looking to seel them as I upgraded to a modern 5 speed. Feel free to email me at cwcisram@comcast.net or call my shop at 412-749-8890.

Post Reply