8 lug dana 44-35 closed knuckle front end
Posted: Sun Apr 15, 2007 6:18 pm
need help to figure out ...does anyone have pic's...
i have aquired a 8 lug dana 44 closed knuckle with 4.10 gears that are dated 9 26 62 on ring gear it has large knuckles ..my best guess is it might be 300 series...trying to find replacement parts ie spindle and wheel brg nuts, drag link w/tie rods, spring mountpads (diff. side critickle as it has a odd shape to the bottom of the axle)both sides prefered...wanting to mount under front of 66 camper special that is converted 4 wheeldrive w/6in skyjacker lift....i have viewed other 44 fronts all have had small knuckles thus adding to my confusion. thanks for any help
ps.my spindle's are held in place by 11 bolts with a gap at 6oclock position(no hole)
i have aquired a 8 lug dana 44 closed knuckle with 4.10 gears that are dated 9 26 62 on ring gear it has large knuckles ..my best guess is it might be 300 series...trying to find replacement parts ie spindle and wheel brg nuts, drag link w/tie rods, spring mountpads (diff. side critickle as it has a odd shape to the bottom of the axle)both sides prefered...wanting to mount under front of 66 camper special that is converted 4 wheeldrive w/6in skyjacker lift....i have viewed other 44 fronts all have had small knuckles thus adding to my confusion. thanks for any help
ps.my spindle's are held in place by 11 bolts with a gap at 6oclock position(no hole)