Dana 44 pinion yoke issue
Dana 44 pinion yoke issue
I had to replace the ring and pinion in my 67 Dana 44 front. I bought the ring and pinion but had to buy one with 26 splines and the old was 10, I think. My problem is now I need a new pinion yoke with 26 splines. Cannot find one for the 5380 u joint only 1310, 1330 and 1350. The only conversion u joint I can find for the 5380 is to a 1410. But I cannot find anyone that makes a 1410 yoke for the Dana 44. Unless anyone has any other ideas I may have to go with say the 1330 or 1350 and have a new shaft made up. Thanks for any input, Jon
Re: Dana 44 pinion yoke issue
You might try calling these guys. Scroll half way down to the 26 spline yokes.
http://www.driveshaftsuperstore.com/Tra ... _yokes.htm
http://www.driveshaftsuperstore.com/Tra ... _yokes.htm
Re: Dana 44 pinion yoke issue
They went out of business about 4 years ago. Another like company uses their phone number but the still working website is obsolete and many parts are not available. Thanks anyway,
- powerwagonpaul
- Sweptline.ORG Member
- Posts: 119
- Joined: Mon Dec 24, 2007 5:01 pm
- City: Las Vegas Nevada
- Contact:
Re: Dana 44 pinion yoke issue
Try these guys
http://www.drivetrainpartslasvegas.com/default.asp
http://www.drivetrainpartslasvegas.com/default.asp
69 w200 "Trevor"
67 W200 "Travis"
"Dodge Power Wagon, when turn around and go back is not an option"
71 Plymuth Valiant \6
67 W200 "Travis"
"Dodge Power Wagon, when turn around and go back is not an option"
71 Plymuth Valiant \6
Re: Dana 44 pinion yoke issue
Ended up buying a Dana 44 pinion for a 1350 u-joint and had a new shaft made up and on the other end a 1410 slip yoke and used a 1410 to 5380 conversion joint. Not a cheap solution but it works. Thanks for the help, Jon