needing a link to an old thread on this forum

This area is for open discussion about anything..."KEEP IT CLEAN"
Post Reply
User avatar
Gordo
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 90
Joined: Wed Dec 31, 1969 6:00 pm
Location: Southeast Wahington State

needing a link to an old thread on this forum

Post by Gordo »

Hey guys, it's been a long time since I posted. I have a harness, which adapts the ford power steering box to the sweptline frame. I am hoping someone will provide me with the link that has pictures of the entire installation. The link is about five or six years old, and I could not find it in the search tab on this forum. This link would help a great deal with getting the harness sold.
Thanks a lot,
Gordo

User avatar
Red383
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 344
Joined: Tue Dec 18, 2012 7:45 am
City: Fort Loramie
State: OH

Re: needing a link to an old thread on this forum

Post by Red383 »

I saved this pic a while back about a ford box
pre 68 ps ford.jpg
1965 Dodge D200, 318 4-speed converted to 4x4 with NV4500 trans

User avatar
Red383
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 344
Joined: Tue Dec 18, 2012 7:45 am
City: Fort Loramie
State: OH

Re: needing a link to an old thread on this forum

Post by Red383 »

1965 Dodge D200, 318 4-speed converted to 4x4 with NV4500 trans

BigBlockTrucks
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 448
Joined: Fri Jan 01, 2021 11:46 pm
City: Binghamton
State: NY

Re: needing a link to an old thread on this forum

Post by BigBlockTrucks »

Gordo wrote:
Mon Jun 26, 2023 12:23 pm
Hey guys, it's been a long time since I posted. I have a harness, which adapts the ford power steering box to the sweptline frame. I am hoping someone will provide me with the link that has pictures of the entire installation. The link is about five or six years old, and I could not find it in the search tab on this forum. This link would help a great deal with getting the harness sold.
Thanks a lot,
Gordo
Search for Digdoug’s user name. The thread was labeled power steering pics

I spent about an hr last week looking for that thread myself.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works

60 d100
383 with 727
4 wheel disc
3.73 geared rear

Post Reply