Disaster avoided today
- my5thmopar
- Sweptline.ORG Pioneer
- Posts: 1003
- Joined: Thu Aug 08, 2013 8:51 pm
- City: Columbia
- State: TN
Disaster avoided today
Pulled the D100 truck out of the garage today. I’m backing up turning around and bang. Thank the Lord. I’m blessed this happened in the driveway and not running down the road. Yup tie rod. Craig
- Attachments
-
- 08EA66B2-9532-4F36-A317-D7DB05719B81.jpeg (38.78 KiB) Viewed 584 times
1964 D100 Utiline
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
-
- Sweptline.ORG Member
- Posts: 132
- Joined: Sat Feb 18, 2017 2:08 pm
- City: Newberg
- State: OR
Re: Disaster avoided today
This is the dropped tie rod end from Speedway? From what I can see in your picture, the break occurred at the beginning of the threads. Is this correct? Have you contacted Speedway yet and if so, what was their comment?
I would have the other side magna-fluxed to see what you might find.
I would have the other side magna-fluxed to see what you might find.
- Jims68
- Sweptline.ORG Pioneer
- Posts: 3127
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Edgewater Park
- State: NJ
- Location: Southern New Jersey
- Contact:
Re: Disaster avoided today
That's a scary situation for sure! Glad it happened at home.
Re: Disaster avoided today
I always pat the hood of the vehicle if it breaks in the driveway and not on the highway. And tell it "Good Boy". Like finding a flat tire before a drive. My floor jack is 10 feet away, easy fix. So give the old truck a smile and pat next time you go by it.
Re: Disaster avoided today
Wow that is lucky. That would have made for an interesting ride.
'64 Utiline CSS "Snowflake" 440-727
Thank you Terry!
Thank you Terry!
- my5thmopar
- Sweptline.ORG Pioneer
- Posts: 1003
- Joined: Thu Aug 08, 2013 8:51 pm
- City: Columbia
- State: TN
Re: Disaster avoided today
Yes at the thread. It looks like the thread machine was set too deep. I’m not sure if from Speedway because I they were attached when I got the front end as a unit. I think it’s from them. I ordered a new set last night. Thanks CraigSeries1Utiline wrote: ↑Tue Sep 07, 2021 5:44 amThis is the dropped tie rod end from Speedway? From what I can see in your picture, the break occurred at the beginning of the threads. Is this correct? Have you contacted Speedway yet and if so, what was their comment?
I would have the other side magna-fluxed to see what you might find.
1964 D100 Utiline
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251