Dimensions of a 68 Sweptline W200 Crew Cab
Dimensions of a 68 Sweptline W200 Crew Cab
I am hoping someone can send me the dimensions of a 1968 Sweptline W200 Crew Cab? Length and width and possibly bed size? I need ASAP as just purchased and am trying to truck one from Colorado to GA and the trucking Co. needs specifics (before head out to get on Monday)...or will not send truck. Thanks!!
Re: Dimensions of a 68 Sweptline W200 Crew Cab
I searched the year and model on this sight, seems to be 160". Went out and measured my 67 w-200, measures 60" wide centerline wheel to wheel. Hope that helps, Merry Christmas
- soopernaut
- Sweptline.ORG Pioneer
- Posts: 8931
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Des Moines,IA
Re: Dimensions of a 68 Sweptline W200 Crew Cab
The front bumper is 78.5" wide. The only things that might be wider would be the mirrors, if equipped, and possibly the door handles. The wheelbase will be 146" or 160" depending if the bed is short or not. A regular cab short bed without a rear bumper is around 192" and a wheelbase of 114". A regular cab long bed is around 210" long without a rear bumper and a wheelbase of 128", so a crew cab appears to be 32" longer. That would be a length of 224" or 242" without a rear bumper.
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1768
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: Dimensions of a 68 Sweptline W200 Crew Cab
Is this a typo? I would think it would be longer with the bumper.soopernaut wrote: ↑Fri Dec 13, 2019 7:44 pmThat would be a length of 224" or 242" without a rear bumper.
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
- soopernaut
- Sweptline.ORG Pioneer
- Posts: 8931
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Des Moines,IA
Re: Dimensions of a 68 Sweptline W200 Crew Cab
I don't understand the question. I've never actually measured a crew cab and don't have any dimensions in any literature. I deduced that a crew cab is 32" longer than a regular cab truck. I had measured my former 68 D100 long bed truck without a rear bumper and added 32" to my result. Since the buyer did not mention whether they have a long or short bed truck, I gave the measurements for both. I suspect they have a short bed truck, so that would be around 224" in length.Wildergarten wrote: ↑Sat Dec 14, 2019 1:49 pmIs this a typo? I would think it would be longer with the bumper.soopernaut wrote: ↑Fri Dec 13, 2019 7:44 pmThat would be a length of 224" or 242" without a rear bumper.
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Dimensions of a 68 Sweptline W200 Crew Cab
added italics and a comma for clarity.Wildergarten wrote: ↑Sat Dec 14, 2019 1:49 pmIs this a typo? I would think it would be longer with the bumper.soopernaut wrote: ↑Fri Dec 13, 2019 7:44 pmThat would be a length of 224" for a shortbed crew or 242" for a longbed crew, without a rear bumper.
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1768
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: Dimensions of a 68 Sweptline W200 Crew Cab
OK, that makes sense of it.PwrWgnDrvr wrote: ↑Sat Dec 14, 2019 8:48 pmadded italics and a comma for clarity.soopernaut wrote: ↑Fri Dec 13, 2019 7:44 pmThat would be a length of 224" for a shortbed crew or 242" for a longbed crew, without a rear bumper.
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
Re: Dimensions of a 68 Sweptline W200 Crew Cab
I would volunteer to measure mine except it might not be of much use. No frame, cab but that's all taken apart. Let me knowWildergarten wrote: ↑Sat Dec 14, 2019 10:54 pmOK, that makes sense of it.PwrWgnDrvr wrote: ↑Sat Dec 14, 2019 8:48 pmadded italics and a comma for clarity.soopernaut wrote: ↑Fri Dec 13, 2019 7:44 pmThat would be a length of 224" for a shortbed crew or 242" for a longbed crew, without a rear bumper.
- swptln
- Sweptline.ORG Member
- Posts: 457
- Joined: Tue Oct 02, 2012 8:31 pm
- City: East Brookfield
- State: MA
- Location: Massachusetts
- Contact:
Re: Dimensions of a 68 Sweptline W200 Crew Cab
Click on my link below to my site, if anyone needs dimensions of 68 or 69, I have factory blueprints for all models in 68 and 69.
Mark D.
61-71 Dodge Truck Association
http://www.sweptlinesunlimited.com
1968 W200 Sweptline
1969 D100 Utiline
1993 D250 Club Cab
61-71 Dodge Truck Association
http://www.sweptlinesunlimited.com
1968 W200 Sweptline
1969 D100 Utiline
1993 D250 Club Cab
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1768
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: Dimensions of a 68 Sweptline W200 Crew Cab
To what level?
Inquiring minds always want to know.
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
- swptln
- Sweptline.ORG Member
- Posts: 457
- Joined: Tue Oct 02, 2012 8:31 pm
- City: East Brookfield
- State: MA
- Location: Massachusetts
- Contact:
Re: Dimensions of a 68 Sweptline W200 Crew Cab
Everything, they are factory blueprints of the entire truck. There are a couple of examples of them on the site.
Frame dimensions, cab and body, fenders, interior, engine, tranny, transfer case...........
Frame dimensions, cab and body, fenders, interior, engine, tranny, transfer case...........
Mark D.
61-71 Dodge Truck Association
http://www.sweptlinesunlimited.com
1968 W200 Sweptline
1969 D100 Utiline
1993 D250 Club Cab
61-71 Dodge Truck Association
http://www.sweptlinesunlimited.com
1968 W200 Sweptline
1969 D100 Utiline
1993 D250 Club Cab