Hillbilly $5.00 sandblaster on Pintress
Posted: Sun Feb 04, 2018 9:22 pm
Sweptline.ORG
'61-'71 Dodge Sweptline Truck Online Community
https://www.sweptline.org/forums/
Hillbilly $5.00 sandblaster on Pintress
Page 1 of 1
Re: Hillbilly $5.00 sandblaster on Pintress
Posted: Sun Feb 04, 2018 9:24 pm
- C88FEC0E-4572-41F3-9204-7F77364278F2.jpeg (48.18 KiB) Viewed 848 times
Re: Hillbilly $5.00 sandblaster on Pintress
Posted: Mon Feb 05, 2018 6:35 am
Without thinking more deeply, that seems like a neat idea for small jobs.
Re: Hillbilly $5.00 sandblaster on Pintress
Posted: Mon Feb 05, 2018 8:40 am
Nice one, I bet it works well enough for little spot jobs 
Re: Hillbilly $5.00 sandblaster on Pintress
Posted: Mon Feb 05, 2018 9:47 am
Don't you have to drill a hole in the blow gun pipe to allow sand into it? OR are there photos missing?
Re: Hillbilly $5.00 sandblaster on Pintress
Posted: Mon Feb 05, 2018 3:12 pm
Interesting... I like this idea.
Re: Hillbilly $5.00 sandblaster on Pintress
Posted: Mon Feb 05, 2018 6:56 pm
They marked the tube with a sharpie and instead of a drill they used a flat file and
Made a channel for the sand. A drill would work but it might clog easier. They also recommended after you drill a hole in the neck of the bottle and
Insert the spray tip, that you seal the 2 holes Around the spray nozzle with silicone to keep the pressure up and keep sand from leaking out.
I am going to try this for sure.
Enjoy
Robert
Made a channel for the sand. A drill would work but it might clog easier. They also recommended after you drill a hole in the neck of the bottle and
Insert the spray tip, that you seal the 2 holes Around the spray nozzle with silicone to keep the pressure up and keep sand from leaking out.
I am going to try this for sure.
Enjoy
Robert
Re: Hillbilly $5.00 sandblaster on Pintress
Posted: Tue Feb 06, 2018 12:00 pm
"Hold My Beer"..... 
John
John
Re: Hillbilly $5.00 sandblaster on Pintress
Posted: Tue Feb 06, 2018 1:03 pm
