Found a crew cad step side (update)

This area is for open discussion about anything..."KEEP IT CLEAN"
Post Reply
Jer8716
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 9
Joined: Sun Dec 04, 2016 6:54 pm
City: La Crosse
State: KS

Found a crew cad step side (update)

Post by Jer8716 »

Hey all I'm new here I found a 1970 dodge d200 crew cab step side that the previous owner started to swap out the 318 for a first gen non intercooled 5.9 cummins with the nv4500 and np205 transfer case. They are asking 7500 for it I was just woundering if that sounds like a good price.
Last edited by Jer8716 on Sat Jan 28, 2017 9:10 pm, edited 1 time in total.

PwrWgnDrvr
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 7356
Joined: Wed Dec 31, 1969 6:00 pm
Location: Walnut Creek, CA

Re: Found a crew cad step side

Post by PwrWgnDrvr »

The eng and trans alone bring $5-6k around here. U decide from there....

Jer8716
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 9
Joined: Sun Dec 04, 2016 6:54 pm
City: La Crosse
State: KS

Re: Found a crew cad step side

Post by Jer8716 »

thats what ive been thinking it needs to be put together but what they have done so far is good quaility work it also has the custom driveshafts and new front and rear brakes, it needs tires and ehaust and a few man hours to be on the road. thinking about building it to be my daily driver.

gww
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 274
Joined: Wed Feb 02, 2011 5:43 pm
City: falcon
State: CO

Re: Found a crew cad step side

Post by gww »

lots of unknows there. donor miles, condition, any resent repairs or rebuilds? quality of work started, condition of sweptline. so on. take a hard look now and poss. save some grief later.
777s on all that have and all that do protect our freedoms.

Jer8716
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 9
Joined: Sun Dec 04, 2016 6:54 pm
City: La Crosse
State: KS

Re: Found a crew cad step side

Post by Jer8716 »

Ok so I talked to the seller again today and as it turns out the engine was rebuilt by a local shop. The trans was done by the local transmission shop at the same time. The body is rust free. Also the front and rear different have been rebuilt. It just needs put together.

Jer8716
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 9
Joined: Sun Dec 04, 2016 6:54 pm
City: La Crosse
State: KS

Re: Found a crew cad step side (update)

Post by Jer8716 »

Ok so here's an update on this truck I havnt pulled the trigger on it just yet. Life has gotten in the way but I am working out a deal on it. As it turns out the dealer bought it as it sits. But hes got a stack of receipts and info on the truck that he has let me go through. Here are some pics.
Attachments
20170128_210357-1221x923-1098x830.jpg
1970 d200 3-967x884.jpg

User avatar
slick
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 3095
Joined: Wed Dec 31, 1969 6:00 pm
City: Tucson/AZ
State: AZ
Location: Tucson, AZ
Contact:

Re: Found a crew cad step side (update)

Post by slick »

If all that has really been done it's definitely worth it. Cummins rebuilds are not cheap and should last you a long long time.
1963 Crewcab
1965 Crewcab
1968 D-100 Longbed
1948 Dodge Panel Truck
1964 Dodge Polara
1957 Shasta

PwrWgnDrvr
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 7356
Joined: Wed Dec 31, 1969 6:00 pm
Location: Walnut Creek, CA

Re: Found a crew cad step side (update)

Post by PwrWgnDrvr »

That doesn't look like a factory front axle.... :thinking

User avatar
soopernaut
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 8930
Joined: Wed Dec 31, 1969 6:00 pm
Location: Des Moines,IA

Re: Found a crew cad step side (update)

Post by soopernaut »

PwrWgnDrvr wrote:That doesn't look like a factory front axle.... :thinking
It's probably a Ford since it has a driver side differential.

Jer8716
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 9
Joined: Sun Dec 04, 2016 6:54 pm
City: La Crosse
State: KS

Re: Found a crew cad step side (update)

Post by Jer8716 »

Well I worked out a deal on the truck today I am trading my 1970 olds toronado for it.

Yellowdodge2005
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 3
Joined: Sun Nov 11, 2018 9:03 pm
City: Concordia
State: KS

Re: Found a crew cad step side (update)

Post by Yellowdodge2005 »

you buy this from teels in hays ks. Its from Sabetha ks from the people that make the krogeman bale beds

Post Reply