Plastic Body Moulding Trim Clips

[rmansberger]

Another request, I think this is a really hard item but I and looking for the plastic rectangle pieces with the ears that clip and hold your lower body trim pieces. If you have a source that would much appreciated.

Thank you.

Rick out

[JohnB]

Try this place: http://www.restorationspecialties.com/Catalog-PDF.html

[sdenty]

If you mean the small square ones that screws go into they are available in the generic(IE Dorman) parts section at a parts store.

[CMR70D3]

Try this link,hope their still in business. viewtopic.php?f=30&t=34630

[rmansberger]

Thanks Chris, Tonkin is still and business and had the part for 93 cents each compared to Mopar sources at $5.95 per clip.

Rick out

[CMR70D3]

Good deal!

[rmansberger]

Tonklin is no longer a source for the body trim moldings, they only had 11 left and are now discontinued. I got the last 11.

If anyone has another source, please let me know.

Rick out

[martincom]

New source for sweptline plastic moulding clips: www.mrgusa.com

Lower Rocker Panel Molding (wide): FA413
This is a GM clip that requires trimming off the raised side shoulders. It is the same clip that was previously supplied by Tonklin.

Front fender sweptline moulding clips: FA4804
This is an exact duplicate of the clip and is the type that snaps into a fender hole and secured by a drive-in pin. These are are some pretty old clips. The first three I attempted to install shattered when driving in the pin. I had to warm them up with the heat gun, to make them somewhat pliable, before installing.