Sweptline.ORG

My first car was a 67 newport 4 door sedan with a 383. I loved that car, but my dad made me get rid of it. Kept the engine thoe. Its in the process of goin in my 69 power wagon. Your car is a beauty comapred to the one I had.

Hi rpm makes it shudder. If I lug it, it takes off ok.

I'm not sure what brand of clutch it is. My friend bought it several years a go for his road runner and decided he wanted a different clutch. It probly came from napa or another local parts store. I tryed slipping the clutch and it doesn't chatter. Only when I take off from a stop.

360.

I had the same problem. Replaced the switch and it worked. You might try checking the connection where the ignition wire goes through the firewall. I also had that happen to the same truck. I ended up just pushing the wire through the plug and rehooking it up under the hood.

I just put a new clutch pack in my 69 w200. It also has a 360 in it and it now shudders when taking off. It feels like when you try and take off fast in reverse and the truck starts hopping. That's the best example I can compare it to.

My buddy and I are planning on going.

Here you go wally.

The small block starter has 3 bolt holes and the big block only has 2. If the big block had the 3rd hole, you wouldn't be able to get to it. Due to it being closer to the block. Both starters are direct drive. Didn't use gear reduction on sticks untill 69.

My friend bought a axel from him a couple months ago. He didn't have any use for it. I'm not sure if I'm keepin the rear window. I will let you know.

I plan on giving the windshield to my dad for his bday.

I just picked up a un cracked or chiped factory wind sheild and a rear slider window for 40$ for both.

Thank you. That's all I wanted to know.

Guys I know the 360 is external balanced. I only put it on a bare 383 crank i had lying around to see if a small block flywheel will bolt to a big block crank.

So my question is: Are the big block and small block 4spd flywheels the same for the 69-71 trucks? I was told that they are different. So for giggles, I put a 360 flywheel on my 383 crank. Aligned the bolt holes up and it lines up. I measured my big block flywheel and small block flywheel, the are t...

This is my duddies 67 D200. He has been storing it at his previous home for the last 6 years with a bad engine. About a year ago he pulled the engine and started to drop in a 4bbl 360. He lost interest when he needed to get a 360 flywheel and clutch. been setting sense. I was in the area with a trai...

Well said!

Brown. Sorry.

Drown 70-71 D100 in sister act, towards the end of the movie.

Patch Adams, 69 D200. Sceen at the beginning. When patch and Truman leave the diner to start their experiamate.