Sweptline.ORG

Set screw in side. Light switch has a hidden button on switch behind dash. Some disconnect cable from heater etc and pull through holding bracket.
Have to figure out removal for each item.

Probably a fine thread. Take it to a parts source and match it up.

Have any of you replaced the door latches and handles without body work with a different type Mine have gotten very stiff and difficult to open Ihave been locked in as the door will not open The star wheel teeth have pieces chiped off from missalignment I'm guessing Also handles are stripping teeth...

Re: Parts request I will email you the tracking numbers as soon as everything is ready to ship. I do keep up with the list of people waiting on parts. About half of them never reply once I have parts available for them though. So thanks for answering my email. Kenny Exline Exline Custom Auto, llc 7...

dodgeboykim wrote: ↑

Mon Aug 28, 2023 1:17 pm

martincom wrote: ↑

Fri Aug 25, 2023 4:20 pm

Does anybody have two of the conical washers utilized on small block & slant six exhaust manifold I could obtain?

I pulled 2 out from my parts drawers. PM Me.

Parts are on the way.

martincom wrote: ↑

Fri Aug 25, 2023 4:20 pm

Does anybody have two of the conical washers utilized on small block & slant six exhaust manifold I could obtain?

I pulled 2 out from my parts drawers. PM Me.

charleypete1957 wrote: ↑

Sat Aug 05, 2023 8:02 am

Sorry, should have posted this with the above post

Not a center cap for a full disc hub cap.

I'm currently in the process of replacing the master and slave cylinders on my 1965 D100. It so far seems pretty straight forward. Are there any pratfalls I should be aware of? For instance, the reproduction service manual I have indicates the clutch pedal spring should be removed. Is it really nec...

Personally I would like to keep my stock{still working in dash} style radio with an electronic upgrade.

Good day, I'm replacing all of my wiring and wondering if there is a convenient way recommended for removing the current wiring bundle, and then inserting a new bundle. I really want to change them up, but I don't want to remove the shaft. Thank you! Pull the wires out but tie a strong string to th...

Good day, I'm replacing all of my wiring and wondering if there is a convenient way recommended for removing the current wiring bundle, and then inserting a new bundle. I really want to change them up, but I don't want to remove the shaft. Thank you! Pull the wires out but tie a strong string to th...

All 61 to 71 100/200 series are the same except for marker holes.

Its not clear what exactly you are referring to. :thinking He's talking about upper coller the shifter arm sticks out of where the 2 screws you loosen to remove coller from column. Ones basically under turn signal switch. He removed screws entirely dropping square nuts into column and can't figure ...

I installed a Car 400 BB into my 70 D500. Bellhousing was from a 67/68 Dodge pickup.. Flywheel was from the LA 318 that came from the D500. BB Starter From a 413 Industrial from a 73/74 C series truck. Starter was a core so snout was installed onto a 318 Hydraulic bell starter. Everything worked.

Yes it will work. Just Hydraulic bellhousing/starter is different. I would have no issues bolting the 318 flywheel to a 383 using same clutch. Did a low budget 68 440 instal in my 66 back in early 76 and used 318 flywheel/clutch assembly.

It appears I have a slow coolant leak coming through a crack in the block a couple of inches above where the oil pan bolts on. It’s on a 67 318. What would y’all do? Put some brand of crack repair in the oil? Jeff Got to ask. Why would you put crack repair in oil if its leaking coolant. :thinking

I have a 69 d-100 w 3 on the tree and sometimes I have difficulty shifting into 2nd gear and other times it gets stuck in 2nd gear ..any suggestions on how to remedy it Fix shifter linkage bushings to remove slop and adjust properly. May also be how you shift where problem is. :thinking :thinking

GOON wrote: ↑

Wed May 24, 2023 9:39 pm

I currently have a 3 on the tree w a 225 slant 6 on a 69 d-100 I have been looking online for a 4 speed and recently came across a np435 from a 63 or 64 truck will it fit my vehicle?

No it will not. You need 69 and up standard transmissions.

1994redram wrote: ↑

Sat May 20, 2023 8:28 am

Dodgeboykim, it's interesting that all of the literature shows a 14" wheelbase difference from a short to long bed on 65-71 trucks. The guy in that thread cut 15" out of his bed. He removed 5" from the rear.

I didnt pay attention to the details.

Link to long box to short box conversion.


viewtopic.php?f=30&t=43081