Sweptline.ORG

Wow,Kenny is stepping it up! He is like the LMC of Sweptlines.

Have you looked at his feedback. 94 percent is not an A when shopping on ebay.He isn't even trying...

10 mpg is pretty close for 318 or 383 power wagon.

What are the symtoms?

I think I would get a rear axle from a 72 or newer 350 cab chassis truck . My 2000 has the pickup bed with dually axle and I HATE it. I am always rubbing the curb because it is so wide. With stock tires and wheels, my 91 cab chassis W350 has 50" between the rear tires. :2cents You can also get the z...

Yea,Bill, they do. I don't know what makes them quieter, but they sure are. I think the slight overhang above the swepty's windshield may be a big factor in the wind noise.

You need to add @5" for a 9' bed over a 66 long bed,so @59"

Looking at your pictures, it looks like the top one has the fender flare pushed out more than the flare in the bottom picture.

Depending how tight the center pin is in its bore,you can get a lot of fore/aft adjustment from a spring pack. The more leaves,the more it can be out of whack. If everything measures up right with the axles,side to side and criss cross,it could be the body is missalinged too. You will likely have a ...

There is a difference on stock dodge springs. One end has the eye above the top leaf and the other end has it below.Switching ends will change the caster of the front axle and affect steering effort. With a stock axle you want eye above in front/below in back. With newer axle you want eye below in f...

The easiest way to get rid of the wind noise on a sweptline is to drive slower or replace the truck with a different era truck. :2cents It was the main issue that after driveing sweptys for over 25 years,I just couldn't take it any longer. My invisible sweptline doesn't have the aerodynamic drawback...

Fish, The "Camper Special" came out after 65.5 with the longer wheelbase.No earlier trucks were badged Camper Special, but I get your point.

I had 2 of those kind of wheels on a 67 truck.They were made by Kelsey Hayes.

You could just forget the other truck and buy this one... http://missoula.craigslist.org/cto/5418673160.html

I have never seen a 68 d100 in a sales brochure that didn't have full size wheel covers. The 68 d100s I have seen that appeared stock had black wheels. I don't have a lick of proof...

Black dash, crash pad and push button door handles came in '67. I have seen a '67 with black dash and crash pad but had fridge handles. Must have used leftover cab and doors and updated dash 'cause that's what was there. :lol: :Thumbsup Is it possible 'custom cabs' have painted dashes? My '67 custo...

I like the look of the side trim on the early trucks best too!

What bill said.

CMR70D3 wrote:

digdoug wrote:The money in your wallet.

Bought it off of Gordo in 2010 Doug. Got a good deal and know I have to put money in it.

If you got it from Gordo,you should be good to go! I have bought plenty of parts from him... not a lemon yet.

The money in your wallet.