Sweptline.ORG

I've dealt with HR Clutch a few times..... Excellent source.

John

What year is the truck? Crossmember mounts or engine side mounts? Tranny still on the bell or off? Radiator out? Fan, pulleys, alternator, etc off? Cab tunnel cover off? Sorry should have stated all that! It is a 1967 d100 with the a745 3 speed. Radiator out and fan and alternator off. Starter is o...

www.dodgesweptlineparts.com

Check with Bud Thorp.

John

Here's what I was thinking about.....
viewtopic.php?f=1&t=40612&p=289580&hili ... mi#p289580

John

PwrWgnDrvr wrote: ↑

Wed Mar 29, 2023 12:06 pm

From other posts, its 128" John.

Early or late 8'? Is your wheelbase 122" or 128"?

John

If all else fails.... get yourself a pair of '69-'70 HP style cast iron manifolds.
I put up with headers on my '67 Coronet R/T for far too long.

John

There is a member who came across [and bought] a '50s vintage 392 Hemi equipped W from the Power Giant era.
I'm not certain ..... but I think its a W200?

John

If it were me.... I'd look for a W and keep your D a D. I've been in
the "middle" of a D200 to W200 conversion for years.... partly due
to the non-Sweptline demands of life.... and partly due to the
untold hours it takes to do something like this alone [in my case].

John

I like it!

John

Ditto the two gentlemen before me.....

John

Hello, I don't know if this the right spot for this question, my son and i are working on a 63 d100, we put the cv swap in the front and a 98 cv rear end. Now were on to the rust, I came across a website called sweptlineparts.com that says they can cut parts off of donor trucks. I setup an account ...

im looking for a decent paint gun for primer and paint. not needing top of the line but also dont want a pos. im not scared to spend a bit of money but also dont want to drop a grand on a gun i may only use a couple times. what do you guys suggest? not hobo freight! :lol: thanks for any input! bria...

Good to see you back on the forum. I used a '68 W100 and a '71 W200 to plow snow
on our property for a few years. Both of them would start up easy in sub zero weather.

John

67step100 wrote: ↑

Mon Dec 19, 2022 5:07 pm

Sounds like beer and wings in the spring. Something to look forward to.

That can be arranged.....

John

Thanks John but it was something I was interested in rebuilding myself. I notice there are a number of different rebuild kits out there, depending on the ratio and spline number. I just wanted to make sure I was getting the correct one so I need to know exactly which box I have. I just noticed you ...

Great looking rig. :Thumbsup A friend of mine bought pretty much the same truck you did a few years back. It was "retired" from a local FD. He had the frame shortened to accept a Lifestyle 6' box. He converted the rear axle to SRW and "softened" the suspension by revising the spring packs. He has th...

From researching this forum it looks like my '67 D100 would have had a 525 Saginaw steering box. Is this correct? There seem to be quite a few 525's, with differing spline counts and different ratios. Would anyone know which one Dodge would have used on the D100's in '67? Alternatively how do I det...

So I just inherited and old 66 camper special that has been off the road for 20+ yrs. Don’t know it’s history other than originally came from CA. The interior has bucket seats with a center console between them. Was this a factory option or were these installed from another type of vehicle? It’s an...