Sweptline.ORG

thanks the pic will help i wasn't sure how many supports there should be. also how does it mount to the frame? do the cross braces just bolt to the frame so the wood is basically supporting the whole bed?

thanks
jason

does anyone have a diagram of how to put a utiline bed together? we have 2 beds both were apart when we picked them up so i'm not sure what braces go where. other then the parts that are clear ie bolting the bed sides to the front and tailgate.

thanks
jason

ok thanks for the input i guess i'll let them go .i have no use for them i got them as part of a parts lot that we bought. 50 is better then nothing so i'd rather sell them then just have them sitting around. any idea what the gauges are worth? i have 3or 4 set that are the same as what came in our ...

https://scontent-ord1-1.xx.fbcdn.net/v/t1.0-0/s600x600/15941320_1375914389113235_6089651639589537026_n.jpg?oh=52c426adaffcb3d039adc2b6023dc02d&oe=58DEBED6 hey guys just wondering what these are worth my wife posted them on some facebook page and got a couple of offers 1 for 10 bucks each and anothe...

i ended up talking to the mechanic at our local cop shop. he said since all the adjustmets are done by the lower control arm the rear mounts have to be mounted at the 35 degree angle or i would never be able to adjust the caster.so i guess thats how i'll be doing it. maybe this will help someone els...

hey guys i'm midway in a crown vic swap on my daughters truck and am having a little problem deciding how to go about mounting the lower control arm bushing/mounts. from the undercarriage pics i can find of crown vics the mount upright and a little angled towards the center of the car. but on every ...

i realize this post is a month old so it might be to late but i bought a cab corner and rocker for my 98 dodge from mills supply and they fit perfect i didn't mic them but they seemed to be the exact thickness as my stock panels. maybe i got lucky because on my challenger i had crappy fit with a amd...

well wish me luck were leaving for forida to pick up a bed for my daughters d200 tomorrow. so far oil pressure is hanging out right around 50 while driving so i think the problem is solved.we've only driven it about 20 miles so far so now it's getting a 3000 mile test drive

here is what the screen looked like today at a cold start it had almost 70psi once it was warmed up it settled in to 25 psi at idle and 50 psi by 1500 rpm.

lesson learned if you ever have to pull the oil pan in 1 of these trucks do your self a favor and pull the engine. it would have been alot faster and eaiser. the factory service manual was completely wrong but i did end up getting the pan off and found that the pick up screen was 90% clogged and of ...

we have the 5.9 between the wifes uncle working at a dodge dealer and alot of research i refused to buy one with a 4.7. took us 6 months to find this one as we were picky of what options we wanted ie 5.9 ,cloth interior, 3rd row seat,rear heat and ac and no hitch so we knew the trans hadn't been abu...

i had put a purilator filter on it . i bought a mopar filter to put back on it once i get this pump changed. so far it's proving to be a bigger job then i thought. i knew i had to raise the engine but i didn't know i also had to drop the front axle in order to get the pan out. and of course the temp...

no additives just the different oil which was on sale at advanced with a cheap filter. i went ahead and ordered a new pump ,pick up tube and gasket from advanced and with there coupons it only cost 68 bucks. do you think i should just stick with normal oil and the blended stuff? and to make my day e...

hey guys i'm getting my wifes 01 durango ready to go to florida next week to pick a up a utiline bed from another member on here. and now i'm having some trouble. i have always ran normal oil in her truck but i did a oil change last saterday before a 200 mile trip this time i used valvoline max life...

i didn't get a chance to pull the bell off but i did find a flat pad under the distributor that had the following numbers stamped in it the top line says " CT36" and the second line says " 10 252 " can anyone translate these? we also picked up a crown vic front end for her truck this weekend now we ...

ok thanks i'll try to pull the bell and clutch off this weekend to see the bolt pattern. so you think $400 would be in the ball park? as far as the engine i did find a casting number on the block that comes back to a 1965 361 but then i ran the casting numbers off the exhaust manifolds that only cam...

can anyone tell me what this trans is? i just pulled it out of a 66 d600 school bus last weekend. i'm thinking it was mated to a 361 but still looking for numbers on the engine. it is a new process and has a casting number of 97292 on the side. i'm thinking it might be a 540 but not sure. any help w...