Sweptline.ORG

I have a 67 318 engine. While discussing doing a swap to 302 heads, someone informed me that my engine came with 920 heads that, with a little bit of work, could perform just as well. Anyone have any input? And if so, what type of work are we talking about here?

Texas, would buckets from that fit my 67 d100, and how much modification are we taking?

I have a bench seat in good shape, but really want buckets so I can make a center console

so if I read an article on a Dodge 318 LA build, but was in a Dart, should that same build work on my '67 D100 with the 318? I know things like exhaust may have to change slightly because of the frame, but what about the stuff just specific to the engine? Or is the Dart 318LA different from my D100 ...

If I was going to call my local junk yard looking for these cylinder heads, what models of vehicles can I ask for? As in what models carried these cylinder heads that they may have?

I have a '67 D100, what is the wheel bolt pattern for this?

Thanks!

he considers himself an expert on VERY little apparently, except for teaching me a lesson on who i have work on the truck! After more reading, and finding a cable hanging by the transmission, looks like somehow the speedo cable come undone from the transmission. does anyone have a picture of where i...

66 d100

And what about my horn, it stopped working at the same time.

when I unplug the cable from the speedo and drive, the wire in the cable doesn't spin or move at all.

Is there a good place to get a wiring diagram for these?

Having a hard time finding some mirrors, anyone know of a good site to get some?

Problem I run into is the mirrors have no permanent stationary part, so when I'm driving on the freeway the wind knocks them around.

Any help for this 66 d100?

I'm looking to improve my performance on my '66d100, but need some help. How can i tell what my current gearing is, and whats a good set to look at? I do most town driving with the occasional trip on the freeway around 65mph. Right now on the freeway my tach reads just about 3k, maybe slightly above...

Help!

Had a friend meshing with wires in the dash, now the speedometer doesn't work. All the dash lights work, fuel gauge works, but no speed.

Is there a fuse for it besides the ones that are under the dash?

68Fish,

Where did you get your seals from, the site that was provided above?

i'm not expecting a Sunday drive in a Cadillac, but how can i get rid of the wind noise? i've looked, and I can't find any rubber mouldings that go around the doors to keep the air out. I'm not talking about the rubber around the window, but any big rubber seals around the door which is where i'm ge...

Well, my '66 became a little younger and became a '69!

Could have had a lot of issues if it were not for the people on this board educating me!

Thanks!

When I put the door panel up to my door, holes don't line up at all. And I have a different interior handle.

All the trucks I see have one that looks like a window crank, mine looks like a flap that you pull
Ideas?

Jim,
I was having issues finding the 302 heads until I came across then earlier today. Which is great, because I'm in Cheney (about 20 minutes from Medical Lake).

So I take it you found the heads worth the money?

And did you say they did the swap for you?

alright guys, which is the better idea. have a '66 d100 that has a 318 LA series from the previous owner. so far have an edelbrock 600cfm carb, headers, and now looking to dive a little deeper into making this thing go. the wife cleared me to spend a little money, so is it better to get some Magnum ...

I cannot find anywhere if my '66 d100 has am emergency brake. I have no pull handle, no hand brake, and no foot emergency brake pedal.

Am I missing something?

So here's what I've got so far, looking to improve on my '66d100 318 LA series engine ( installed before I picked the truck up) Edelbrock 650CFM 4barrel carb Headers running the dual exhaust Offenhauser dual plane intake manifold 3 speed 727 automatic trans Looking to replace the cam, and was told t...

Where's a good place to get interior door panels for a 66 d100?