Sweptline.ORG

Fred

Montgomery, Texas (North Houston)

I got one from orileys. took 24hrs for them to get it in. $25

It is set on the compression stroke tdc and im positive the firing order is correct. I did change the condenser. Question, The point gap, is it .16" or .016". Its also set at peak of distributor cam lobe, right?

Truck hasn't ran in at least 10 years. I have it cranking good. Replaced ignition coil, Ballast Resistor, Points, Dist Cap, rotor, spark plugs, wires. It does spark and crank. I've been trying gas down carb and starting fluid. I pull plugs and air out between tries to prevent flooding engine with fu...

Probably a dumb question. Button to left of clutch on floor. What is it for?

Thanks, Fred

They do make the lug nuts. The only problem is there all metric...
http://www.eastcoastalloys.com/alloy-wh ... s-1-5.html

they actually make wobble nuts for this application. I just googled it

Problem solved!

http://www.youtube.com/watch?v=33KljLVvTM0

This is for wheel bolts...but i see no reason we couldn't modify it for nuts... Very interesting idea, IMO it looks more sound than a cheap aluminum spacer.

I also think it is incorrect. But both Wagner and centric sent me the same one...

Thanks for all the help! Here is my problem. I have a Wagner and centric hardware kits. Both came with a bottom spring that looks like this... I can't seem to find a secure fit for it.

Thanks! It's just this bottom spring. No way I put it on feels very secure...

I took off my front brake assembly. I need a picture to put it back. It's the front brakes where the the wheel cylinder only has one side. All the pictures are newer years with two sides to the front wheel cylinder.

Thanks!

So i just shuffled through legal documents online. From my understanding is that as long as the content remains withing the confines of the forum, it is permitted. AKA, members only access. We can argue this to everyone is blue in the face. Here is my basic arguments. -But most other forums have it,...

I'm almost positive it is Legal for forums because it is peer-to -peer... Either way, ill just buy the CD and post it once I get it.

I know the Ram and Honda forum I use for my other cars have a 'Technical' section where you can download the service manuals for free. From my understanding it is completely legal as long it is for members only, because of peer to peer copyright laws. Considering most the manuals for purchase I can ...

YUP! That is the one i purchased!

I figured i probably have to borrow a full size trailer from my friend. Will something like this work to remove the rear?

http://www.autozone.com/autozone/access ... ifier=2050

Thanks,
Fred

I just purchased a 61 D100. It has been sitting in a garage for 15 years. I tried to load it on the tow dolly i have, but the front right and rear left wheels won't spin at all. I tried banging on the drums with a BFH to knock them loose... with no luck. This truck is over an hour away from me. I do...