Search found 160 matches
- Sun Jan 25, 2015 6:29 pm
- Forum: GENERAL CHIT CHAT (NON-TECHNICAL)
- Topic: 64 D100... what to do...
- Replies: 69
- Views: 5654
Re: 64 D100... what to do...
Yes a compression test will tell you alot. Also if you disconnect the metal fuel lines and used compressed air you can blow alotof the gunk out. Also ttry clr or a degreaser of some sort, seal one end , fill the line with cleaner and then cap the other end let it sit for as long as desired then repe...
- Sat Jan 24, 2015 4:29 pm
- Forum: GENERAL CHIT CHAT (NON-TECHNICAL)
- Topic: 64 D100... what to do...
- Replies: 69
- Views: 5654
Re: 64 D100... what to do...
Get a breaker bar and socket that will fit and crank it over easiest way to tell
- Tue Jan 13, 2015 1:24 pm
- Forum: GENERAL CHIT CHAT (NON-TECHNICAL)
- Topic: 64 D100... what to do...
- Replies: 69
- Views: 5654
Re: 64 D100... what to do...
right!? i already have two and am looking at getting a third.
- Tue Jan 13, 2015 9:14 am
- Forum: GENERAL CHIT CHAT (NON-TECHNICAL)
- Topic: 64 D100... what to do...
- Replies: 69
- Views: 5654
Re: 64 D100... what to do...
hahaha, the gas tank and fuel line issue wouldn't be too difficult to under take and drum and shoe kits for w series trucks are a little easier to come by depending on what axles are underneath. post pictures of this w200 your getting. id love to see it! :Thumbsup ill post some pics of a dual under ...
- Wed Jan 07, 2015 9:50 am
- Forum: GENERAL CHIT CHAT (NON-TECHNICAL)
- Topic: 64 D100... what to do...
- Replies: 69
- Views: 5654
Re: 64 D100... what to do...
certain models did have a limited slip diff, what would you want the front axle to do? do you want it to be a full time, limited, locked, lockable at hubs ect..... then with that knowledge it would eliminate alot of front axles from the mix and make it alot easier finding the one you want.
- Mon Jan 05, 2015 11:55 am
- Forum: GENERAL CHIT CHAT (NON-TECHNICAL)
- Topic: 64 D100... what to do...
- Replies: 69
- Views: 5654
Re: 64 D100... what to do...
just throwing in my :2cents if your up for doing some modification, my plan is to take a disc brake front axle with leaf springs form a 78 and adapt the axle to my original leaf front suspension, then adapt the steering column to the power steering associated with it, once its mounted, then figure o...
- Tue Nov 25, 2014 9:58 am
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: Brake conversion
- Replies: 5
- Views: 923
Re: Brake conversion
im selling a complete ready to install scarebird conversion if your interested. PM and ill send you some pics if your interested.
- Tue Nov 25, 2014 9:56 am
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: Scarebird brake install HELP needed!!
- Replies: 11
- Views: 1882
Re: Scarebird brake install HELP needed!!
if any of you need a scarebird conversion or know of someone who wants one, i am selling a complete axle from disc to disc. ill save you or someone some cheddar and sell the whole thing for $500. steering gear box linkage and leaf springs included if you want them. :Thumbsup I'm located in phoenix, ...
- Tue Nov 25, 2014 8:19 am
- Forum: PHOTO GALLERY
- Topic: Updated photo of the 61
- Replies: 11
- Views: 1400
Re: Updated photo of the 61
im really digging the interior color paired with the exterior color. sweet looking ride man!
- Tue Nov 04, 2014 7:46 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 440 engine swap
- Replies: 18
- Views: 5353
Re: 440 engine swap
Hola Holts Summit Along with what Joe has said, add the following: A set of OEM Center Dumping Exhaust Manifolds from any Car Division from 1959 to 1966 with a 361-383-413 or 440 will bolt to a Big Block --- and will clear --- with out a hammer or torch. This is what was done for all Factory C.S.S....
- Fri Oct 31, 2014 1:22 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: automatic transmission cooling lines
- Replies: 8
- Views: 521
Re: automatic transmission cooling lines
thanks. Should there be a part of the lines made out of rubber for flexibility, or can the whole line be made out of metal? What about the connections on the radiator? Does it make a difference which one is mounted where? as far as flex goes, you could put a few coils in the line ( if your using st...
- Fri Oct 31, 2014 1:14 pm
- Forum: PHOTO GALLERY
- Topic: pic request patina
- Replies: 44
- Views: 5969
Re: pic request patina
Here's mine 45 years of patina at its finest oh man, if you ever want to sell your crew cab let me know. i spotted it and had to grab a napkin to whip the drool off my desk. :Thumbsup Haha thanks man! But no plans of ever selling it no problem, i love how these trucks age. not so much like wine but...
- Wed Oct 22, 2014 11:01 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: engine making ticking sound
- Replies: 5
- Views: 716
Re: engine making ticking sound
Kim gave me an idea to use ATF in the oil and once the lifter frees up to do an oil change.
- Wed Oct 22, 2014 8:00 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: engine making ticking sound
- Replies: 5
- Views: 716
engine making ticking sound
hey guys, so previously i had snapped a bolt off in the head of my 360 small block and tried extracting it, didn't work. drilled it out and re-threaded the hole. so now i can tighten up my exhaust manifold. well the noise has not gone away. i thought it was noisy because of an exhaust leak. but it s...
- Fri Oct 17, 2014 12:47 pm
- Forum: PHOTO GALLERY
- Topic: look at what I seen today!
- Replies: 9
- Views: 1231
Re: look at what I seen today!
MikeMc wrote:MMorell, thanks for stopping. It's always nice meeting new enthusiasts
Would be bad @#% to extend your crew cab. A little extension behind the rear doors
Just send me your truck with the glove box full of cash and I'll build you a road worthy truck.
IM NEXT!!!!! :D
- Fri Sep 26, 2014 2:23 pm
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: new box power steering
- Replies: 394
- Views: 53542
Re: new box power steering
BTW - Do you think the angled arm will be enough to do the trick? I suppose my concern is with different tire sizes and such. [/quote]
thats what im wondering, im running 30x10x15's on my truck. fingers crossed that the angled arm will work to eliminate the rubbing issue.
thats what im wondering, im running 30x10x15's on my truck. fingers crossed that the angled arm will work to eliminate the rubbing issue.
- Mon Sep 22, 2014 2:49 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: high oil pressure, blowing oil out dip stick tube.
- Replies: 40
- Views: 1900
Re: high oil pressure, blowing oil out dip stick tube.
thanks for the info, i ran a test and found where i was leaking from. silly me, i had a bad exhaust leak. i buttoned it up with new gaskets and it quit doing it.HEtkind wrote:My guess is that bottom ring, the compression ring is bad. Try a leakdown test and see if you air out the breather.
Howard
- Wed Sep 10, 2014 7:39 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: high oil pressure, blowing oil out dip stick tube.
- Replies: 40
- Views: 1900
Re: high oil pressure, blowing oil out dip stick tube.
I am right there with you, there were better people that could have been put into office. They would have helped bring the economy back and would actually have a foreign policy. Whatever happened to "we will not negotiate with terrorists" ???????????? I am red, white and blue died true in the wool, ...
- Tue Sep 09, 2014 12:59 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: high oil pressure, blowing oil out dip stick tube.
- Replies: 40
- Views: 1900
Re: high oil pressure, blowing oil out dip stick tube.
nothing at all, jerry rigging is more in league with the way i do things. i don't mean to stir up a hornets nest. sorry for the comment.[/quote] Something against "jerry" rigging?.... old school derogatory term for German people. Can't win for losing now days.....lol... :lol: right, oh well, at leas...
- Tue Sep 09, 2014 7:41 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: high oil pressure, blowing oil out dip stick tube.
- Replies: 40
- Views: 1900
Re: high oil pressure, blowing oil out dip stick tube.
nothing at all, jerry rigging is more in league with the way i do things. i don't mean to stir up a hornets nest. sorry for the comment.sweatybetty wrote:do you have something against "afros"?Jake66 wrote: afro engineering