Sweptline.ORG

Thanks sending you a PM

hi, I'm hoping someone has done the shee mar 106 turn signal switch install that I can get a wiring diagram from?
thanks for any help, I appreciate it!

I have to do this as well when it warms up here. How much adjustment is there with the three screws on the cab part? It must be slotted behind it I assume?

Hi, yes I did get the bracket. I crawled under there for a minute today just to check things out. Its 8 degrees here so it was only a minute...lol It looks like I might have some more rust damage to the bracing under the bed there as well. I didn't take my phone with me under there to snap some pics...

I just ordered one, looks like a good source of info!

Hi, I have a 70 D100 Long bed. The passenger side front frame bracket support where there is a wooden block (?) is rusted out. Are they the same on all the years? I assume a previous owner left stuff in the bed the killed the bed floor and this one support. The sides of the bed are nice, the floor o...

Hi, thanks very much for the pictures and info both of you. Also thanks for taking the time to measure as well! I ordered one up! Thanks again, Bo

Hi, there are some grills on ebay. Maybe a little costly though? http://www.ebay.com/itm/70-71-Dodge-Tru ... b7&vxp=mtr

Hi, I need to pick one up for my 70 D100. EBay has them in a few different lengths. Just wondering what would have been there from the factory on a flat tailgate? Thanks!

LC from PA I took a bedliner from a late 70 long bed that had the rails over the top edge of the bed did a little measuring to cut off to just fit under lip I left the front bed lip on only problem was the wheel weel shape was just a little off had to jump on it to pop it down in it will never blow...

I'm getting pm's asking about the mirror brackets and it looks like they're sold to the first pm message asking about them. If he doesn't come through, I'll go to the next message in line. I'm only asking for shipping cost on this stuff. As for the DODGE letters, I have some but not sure if they're...

Hi, I have a 70 D100 do you have the DODGE letters that go across the front of the hood? Let me know, thanks!

wally426ci wrote:My cousin uses a rubber mat

Thanks, I might end up doing that if a bed liner isn't practical to do.

PwrWgnDrvr wrote:

bmoparmofo wrote:Is it wider than a normal bed?

What do u consider a "normal" bed?
I consider sweptline beds to be normal!

I just wondered if there was a bed liner that would work in the truck. Even if it was from a different model or year. I was curious if other members had installed one in their truck.

Thanks mopardwh!

Is it wider than a normal bed? I know they make 8 foot bed liners. It would be nice to find one, I have some rust damage on the floor of the bed towards the front.

Hi, I was just wondering if anyone has a source for an under rail bed liner 8 foot bed 128 inch wheel base? The inside of my bed is a little too beat to look good with the spray liner. I'm not sure if any liners from other trucks fit? My quick Google search didn't come up with much. Thanks!

http://i273.photobucket.com/albums/jj223/bmoparmofo/10441432_10204240462913158_1810639166917658289_n.jpg Making some progress. I was surprised how well the paint came back to life! I have replaced the alternator, starter, regulator, engine wiring harness, gas tank and got new tires on her. A bunch ...

Hi, just wondering if anyone has used this fuel sending unit? http://www.ebay.com/itm/400627324655?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 I have a 70 D100, Although it says its for my year, I am guessing its actually for the earlier years. I am not sure if there is a lot of difference or...