Sweptline.ORG

that w300 is sweet lookin!

im not to sure of the year of the fly wheel and tranny. but the motor is a 65 383 chry or ply newport. my dad bought the stuff off a old ranch guy here in my home town. its gotta be mid 60's. i know the clutch is new. i put it in right b4 i parked it.

oh dude that is awesome! i need this like a few years ago. wonder how hard it would be to install in the power wagons?

yep i pulled it about 5 or 6 times. pretty simple thing. pull the middle drive line undo the 4 bolts and pull on out. nothing to it.

very nice dude!

i hope its not the bearing. although pullin the tranny is no big deal. i can pull it myself in a no time. im gonna go threw an check all the ujoints and make sure there all good. i noticed when i crawled under it last week. it looks like i need new straps to hold the ujoint to the yoke. mine are a l...

dude that thing looks awesome! looks like the back tires need to come out a lil though.

might try an make sure you got the right pump. some pumps pull the gas to the pump and the others push the gas. another thing is to look at is to make sure were the gas comes out of the tank it isnt plugged.

i finally got my 67 up an driving for the 1st time in years. let me tell ya. the tranny is making a bunch of noise. so i checked the fluid and it is full. are the standard 4 speeds in these easy to rebuild?

sounds like a dumb question but would a worn down teeth cause this? i figure i would ask since im here were would i get the ring gear for the fly wheel?

i got the same axle but mines a D44

swptln wrote:Use studs instead of bolts on the flanges. Unless you want to be constantly retighting them.
Studs are the best...

Mark D.

studs you say? i didnt know you called me out. sry its been a while since i been on here.

sometimes mine does this also. try smacking it with your hand as you pull the handle. not like the hulk does just a love tap. you know these old dodges need a lil love every now and then. it just show them who is boss.

hey guys sry about all these questions. so a few years ago i was missin with the old girl and noticed my nose on my starter was broke in several peices. so i had it rebuilt. ever since i have had this starter in my truck. before it was even rebuilt. when you try and start it the starter would make a...

were i found one was on a i wanna say a 66 dodge van with a 318. it had a what you are needing. also schucks had sold me a new one for pretty cheap. cant remember the amps it put out though. im sure you can put a double pulley on a single pulley 100 or 200 amp alt.

a ground is the biggest part of wiring. if you have hardly any grounds add a bigger gauge wires were it needs it. fire wall to back of block. block to frame. frame to battery. pretty much makes it a loop. replace all the power wires with bigger gauge wire also. anything will help with these old dodg...

thank you for helpin out. i was lookin at the pirate 1st page. about half way down were they show the yoke differences. the yokes i have in my dodge now all the way threw is the bigger one. to be honest with you guys i have no idea what front end i have i have looked all the way around that sucker a...

who says rednecks cant have fun!

yeah it is a 61. should i keep looking?

man that is bad ars! they caught some major air in that video.