Sweptline.ORG

hers mine had a shotty repaint in the 80's

thats about how i did mine too. did you pre/ post heat ?

67-3/8" wms

found it

you need an 04 and up sub frame to get the aluminum bolt one one the ealeyer ones are part of the chassis.

Yep its mine has a 3 " drop beam spring under sno leafs pulled till the axle hit the frame. In the rear the frame was Zed 6 inches the the box body dropped. Rear axle is trailing arms and a Panhard

Whole thing rides on air

send your front axletoo sids to get it dropped he can do 3" then if thats not enough pull a leaf or too after that you will want a bit of a stiffer shock and a shorter pitman arm to fix the steering in the back i would do a flip right away with a c notch

A. AIR BAGS DONT LOWER ANY THING YOU STILL NEED TO LOWER IT FIRST

B. YOU CAN DO THE BEAM AND THE LEAFS AND GET MOR LIKE AN 8" DROP WITH OUT HITTING THE PAN


STILL A SOLID AXLE

ive used volvo fans alot and taurus fans the volvo ones are much nicer tho

i dont know that hes the only one but hes certanly the best

best thing you can do is get a dopped axle from sids. lots of info on this site about them. pull the blocks pull the extra leafs and maybe one or two extra for good mesure. and if you can find one get a w series pitman arm there a bit shorter that should lower it 5-6 inches from where it sits now

i have a few factory dashes that are nfg i could send you one

ya thats a dangerouse hack lift ya got there

Solid guy impressive work he did a full tube chassis for one of my buddies

who built the chassis ?

my 2002 doge 1 tonne work truck has just a touch over 400,000 on it now

Are you looking for factory lay out ?

Pm me ill try and snap some for you tomorow

you should not technicaly reuse u bolts the threds are designed to lock togeather ( i do it all the time never had a problem) center pins are ok to reuse aslong as there in good shape "i havent noticed any bump steer but i wanders a bit" this is bump stere just a really mild case the w series pitman...

mines bagged with a solid axle and the frame just touches with a 27-1/2" tall tire

If your just going 2" you won't need to mess with your pit man arm