Sweptline.ORG

Hi guys. Unfortunatly my 1966 5.2l poly 318 is on its last leg. The motor has alway burnt oil and leaked it out the block at the closest oil jacket. Lately the head gasket has really blown through and its to the drawing board. My biggest issue is i have put a good amount of accessories on to the 66 ...

Here the issue...I have blown 3 Voltage regulators in the past 3 months. I first replace the original Regulator about 6 months ago just to have it new. I blew the first voltage regulator 3 months ago. Fortunately i had it warrantied and drove it for about 3 months till about a couple of days ago i b...

1966 dodge d200 mint green with rust

Sweet looking truck, paint came out beautiful! Also looks like we live in the same town!

Hi guys im pretty new on the forum here and im just starting to learn how to work on engines! I have a 66 d200 With a 318 thats burning oil. The truck had sat for more than 20 years then shes been a daily driver ever since. When i first got her i would go through 1 qt every tank. Slowly it stoped bu...

Sweet truck! Looks like a fun project. If you ever want to sell the west coast mirors let me know ;)

see this beauty almost every day! looks like a solid rust free california truck!

hey guys! Junk wanted to give ya'll an update on my 66 dodge d200! She now in california and looking better than ever, now shes in a stable climate. She been a great project for a first timer and most of the work except the exhaust and tires i have done myself. Heres a list of what has been done. Fi...

ended up rebuilding it!
thanks again!

The champion radiator worked great with only a little bit of fabrication! I would 100% recommend it!

Its out of a 68 big block charger from the champion rep i ordered it from, apparently others are using this same one in earlier year sweptlines with big blocks...fits nicely with room to spare :Thumbsup Sweet! Called them today after i measured my tollerances and it looks like it should fit! I will...

Hi, just wondering if anyone has a source for a replacement gas tank for a 70 dodge d100? Mine has been brazed on the drivers side lower and has now started showing leaks on the pass side. Also my truck is a 318-1 with an a230 trans. What would have been the correct carb and model #? It has a holle...

If anyone needs to know the part # from Champion for this radiator the part # CC1640, just a helpful tip. Its really close just had to drill one of the mounting tabs it fits like a glove. Its a 3 row with a large core 26" wide and 24" tall. did you find that this radiator fit most dodges? iv got a ...

Im in Walnut Creek and I sell parts if I have extras. Some of my hoard below: 42 WC63 6x6 59 D500 parts truck 61 D100 392 hemi project 62 W300 62 D400 dumper parts truck 63 D100 parts truck 63 D200 Crew Ute 413 NP420 parts truck 64 D100 Ute 64 D100 CSS Ute 65 D100 CSS Ute 66 D100 CTD NV4500 Daily D...

My original carburetor on my 66' took the sh*ts today, My question to you guys out there is if you have any recommendations on a two barrel replacement preferably a manual choke. I have the original 66 318 5.2L. Thanks for you help! -JH

wally426ci wrote:Terry's house. PwrWgnDrvr

who is this terry guy and where is he located? does he sell anything? Looking for body parts down the road....

Hey guys! searching the web for the past couple of day and cannot seem to find any all vintage junk yards near Norther CA. I was wondering if any of you california guys knew of a good junk yard that might have some vintage stuff around sf-sacrimento area!?
thanks again!

Great looking truck! Funny story i saw you d200 at the goodguys car show last week and took a picture with my phone. The first thing that jumped out at me where those fargo letters long with a different grille! Personally i would keep the fargo letter gives it a bit of personality. i wish my truck w...

I'm with you on the original paint. :Thumbsup As am I. :Thumbsup Welcome to the site. :welcome :usa You can try contacting Gary at PDQ Auto Movers. He's a fellow Sweptline guy. You'll get a little discount if you tell him you're moving your truck and you are a forum member here. :2cents :idea :Thum...

didnt even notice ! lol