Sweptline.ORG

I have been rocking the straight pipes for a few years now!

Decided I couldnt pass up this opportunity as I drove by, figured my sublime green would be a nice contrast to the leaves.

I did the same thing to an old door I have hanging on my wall. I used one shot, let it dry for a couple hours and started rubbing on it with a thinnered up rag. I cant remember which worked better, lacquer thinner or acetone. Then I rubbed a scotch brite on some rusty metal, then rubbed the paint wi...

Thought I would share a fourth themed picture, hope you all had a good one.

How straight were they before you sent them out?

Kinda similar to my van.....

I bought some cork material from mcmaster carr, and I cut little circles, and no more gas cap leaks on any of my vehicles while turning, and it was cheap. Plus all my gas caps are tight fitting now. it came in a roll, and there was a certain kind that was for fuel .

I was in vegas this past weekend for mopars at the strip, seen this sweet power wagon, talked to the owner for a while. He put the body onto a 98 frame, and even used the dash, just had to notch the doors a bit to clear the dash! Had a bit of a body lift I spose to clear the frame, or tires, idk. Re...

Yup, ha ha. I does say 200 on the grille, but its a half ton shorty. I have another one that has military nomenclature on the door, but I forget what it all says.
I made up all the stickers for the doors, just havnt put them on yet. Something about for official use only.

I did my 65 truck up, here is the front, can you guess what it means, lol

There is a swepty somewhere in this video... I see two, lol

http://youtu.be/7MqFmey34xk

The bracket looks like a elec ign brackect that bolted to the back of the engine on a motor home actually, not like the bracket that bolts onto the firewall of cars. I got one of those somewhere too.

Yeah, your probably right, I do know it is a d600, but I thought I saw on the tag that it said 74. The one under the hood, Ill look again tonight.

Im not as knowledgeable as a few guys on here, but I would like to say I know a few things about these trucks. Especially since I own a few of them, and I am always trying to learn more. every day is a school day.

Those are off a 76 ish 318.
Easy way is to just look at the balancer, if it has an extra notch hanging off the balancer, it is a 360, smooth all the way around, 318.
Newer 360's have an indentation in the balancer that is half moon shaped.

I made a driveshaft for this car yesterday. Tubing was $1.69 an inch! I was nervous welding it all together, didnt want to screw that up!

That cab is a 74, nice sheet metal, was goin to the crusher, so I snagged it. I need to take a picture on how they wired in the factory electronic ignition on it. It has a bracket that goes around the centering pin on the firewall that catches the hood in the down position. Since it is a 74, it had ...

Yeah, we had a blizzard roll through last week that made a mess of my parking lot, so I have all my vehicles parked all over trying to get it to dry out. I am constantly getting people there that think I have parts for a 85 ramcharger stashed away that I am willing to sell, drives me nuts. One guy w...

Here is the 64 Polara I have been putting the hemi into. Getting closer to it being done. http://i5.photobucket.com/albums/y164/cageman1/2013-03-11_13-14-49_827.jpg http://i5.photobucket.com/albums/y164/cageman1/2013-03-11_13-15-02_976.jpg http://i5.photobucket.com/albums/y164/cageman1/2013-03-11_13...